*PET08PGC1*
Unknown · OTHER
· by prusa-system
· 0 downloads
Inheritance
-
*PETPG4S*
→
*PETPGC1*
→
*PET08PGC1*
Includes (1)
Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.
Settings
Print temperature
- Chamber (°C)
-
35 via *C1_CH_PET*
Cooling
- Fan minimum (%)
-
30 inherited
- Fan maximum (%)
-
65 overriddenwas 60 (inherited)
- Full fan if layer below (sec)
-
35 overriddenwas 20 (inherited)
- Slow down if layer below (sec)
-
20 overriddenwas 8 (inherited)
Other settings
- bridge fan speed
-
65 overriddenwas 60 (inherited)
- chamber minimal temperature
-
0 via *C1_CH_PET*
- compatible printers condition
-
printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0] overriddenwas printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and ! nozzle_high_flow[0] (inherited)
- enable dynamic fan speeds
-
1 inherited
- filament load time
-
10.9 via *C1_CH_PET*
- filament unload time
-
8.9 via *C1_CH_PET*
- idle temperature
-
130 via *C1_CH_PET*
- overhang fan speed 0
-
60 inherited
Raw resolved JSON
{
"fan_max_speed": [
"65"
],
"fan_min_speed": [
"30"
],
"bridge_fan_speed": [
"65"
],
"overhang_fan_speed_0": [
"60"
],
"slow_down_layer_time": [
"20"
],
"fan_cooling_layer_time": [
"35"
],
"enable_dynamic_fan_speeds": [
"1"
],
"compatible_printers_condition": [
"printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0]"
],
"idle_temperature": [
"130"
],
"filament_load_time": [
"10.9"
],
"chamber_temperature": [
"35"
],
"filament_unload_time": [
"8.9"
],
"chamber_minimal_temperature": [
"0"
],
"name": "*PET08PGC1*",
"filament_settings_id": [
"*PET08PGC1*"
],
"type": "filament"
}
Version history
View full history with diffs →- v1 created 2026-05-19 11:27