PETPGC1

Unknown · OTHER · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

→

*PETPGC1*

Includes (1)

Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.

*C1_CH_PET*

Inherited from this (2)

Settings

Print temperature

Chamber (°C): 35 via *C1_CH_PET*

Cooling

Fan minimum (%): 30 overridden
was 20 (inherited)
Fan maximum (%): 60 overridden
was 40 (inherited)
Full fan if layer below (sec): 20 overridden
was 20 (inherited)
Slow down if layer below (sec): 8 overridden
was 7 (inherited)

Other settings

bridge fan speed: 60 overridden
was 40 (inherited)
chamber minimal temperature: 0 via *C1_CH_PET*
compatible printers condition: printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and ! nozzle_high_flow[0] overridden
was printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and ! nozzle_high_flow[0] (inherited)
enable dynamic fan speeds: 1 overridden
was 1 (inherited)
filament load time: 10.9 via *C1_CH_PET*
filament unload time: 8.9 via *C1_CH_PET*
idle temperature: 130 via *C1_CH_PET*
overhang fan speed 0: 60 overridden
was 40 (inherited)

Raw resolved JSON

{
  "fan_max_speed": [
    "60"
  ],
  "fan_min_speed": [
    "30"
  ],
  "bridge_fan_speed": [
    "60"
  ],
  "overhang_fan_speed_0": [
    "60"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "fan_cooling_layer_time": [
    "20"
  ],
  "enable_dynamic_fan_speeds": [
    "1"
  ],
  "compatible_printers_condition": [
    "printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and ! nozzle_high_flow[0]"
  ],
  "idle_temperature": [
    "130"
  ],
  "filament_load_time": [
    "10.9"
  ],
  "chamber_temperature": [
    "35"
  ],
  "filament_unload_time": [
    "8.9"
  ],
  "chamber_minimal_temperature": [
    "0"
  ],
  "name": "*PETPGC1*",
  "filament_settings_id": [
    "*PETPGC1*"
  ],
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 11:27