PLA08PGC1

Unknown · OTHER · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

*PLAPG4S*

→

*PLAPGC1*

→

*PLA08PGC1*

Includes (1)

Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.

*C1_CH_PLA*

Settings

Print temperature

Chamber (°C): 20 via *C1_CH_PLA*

Cooling

Fan minimum (%): 85 overridden
was 85 (inherited)
Fan maximum (%): 100 inherited
Full fan if layer below (sec): 40 overridden
was 40 (inherited)
Slow down if layer below (sec): 17 overridden
was 8 (inherited)
Min speed when slowed (mm/s): 20 inherited

Other settings

bridge fan speed: 100 inherited
chamber minimal temperature: 0 via *C1_CH_PLA*
compatible printers condition: printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0] overridden
was printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and ! nozzle_high_flow[0] (inherited)
enable dynamic fan speeds: 1 inherited
filament load time: 10.9 via *C1_CH_PLA*
filament unload time: 8.9 via *C1_CH_PLA*
idle temperature: 170 via *C1_CH_PLA*
overhang fan speed 0: 100 inherited
overhang fan speed 1: 100 inherited
overhang fan speed 2: 0 inherited
overhang fan speed 3: 0 inherited

Raw resolved JSON

{
  "fan_max_speed": [
    "100"
  ],
  "fan_min_speed": [
    "85"
  ],
  "bridge_fan_speed": [
    "100"
  ],
  "slow_down_min_speed": [
    "20"
  ],
  "overhang_fan_speed_0": [
    "100"
  ],
  "overhang_fan_speed_1": [
    "100"
  ],
  "overhang_fan_speed_2": [
    "0"
  ],
  "overhang_fan_speed_3": [
    "0"
  ],
  "slow_down_layer_time": [
    "17"
  ],
  "fan_cooling_layer_time": [
    "40"
  ],
  "enable_dynamic_fan_speeds": [
    "1"
  ],
  "compatible_printers_condition": [
    "printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0]"
  ],
  "idle_temperature": [
    "170"
  ],
  "filament_load_time": [
    "10.9"
  ],
  "chamber_temperature": [
    "20"
  ],
  "filament_unload_time": [
    "8.9"
  ],
  "chamber_minimal_temperature": [
    "0"
  ],
  "name": "*PLA08PGC1*",
  "filament_settings_id": [
    "*PLA08PGC1*"
  ],
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 11:27