*PLAPGC1*
Unknown · OTHER
· by prusa-system
· 0 downloads
Inheritance
-
*PLAPG4S*
→
*PLAPGC1*
Includes (1)
Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.
Inherited from this (2)
Settings
Print temperature
- Chamber (°C)
-
20 via *C1_CH_PLA*
Cooling
- Fan minimum (%)
-
85 overriddenwas 70 (inherited)
- Fan maximum (%)
-
100 inherited
- Full fan if layer below (sec)
-
40 overriddenwas 17 (inherited)
- Slow down if layer below (sec)
-
8 overriddenwas 6 (inherited)
- Min speed when slowed (mm/s)
-
20 inherited
Other settings
- bridge fan speed
-
100 inherited
- chamber minimal temperature
-
0 via *C1_CH_PLA*
- compatible printers condition
-
printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and ! nozzle_high_flow[0] overriddenwas printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and ! nozzle_high_flow[0] (inherited)
- enable dynamic fan speeds
-
1 inherited
- filament load time
-
10.9 via *C1_CH_PLA*
- filament unload time
-
8.9 via *C1_CH_PLA*
- idle temperature
-
170 via *C1_CH_PLA*
- overhang fan speed 0
-
100 inherited
- overhang fan speed 1
-
100 inherited
- overhang fan speed 2
-
0 inherited
- overhang fan speed 3
-
0 inherited
Raw resolved JSON
{
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"85"
],
"bridge_fan_speed": [
"100"
],
"slow_down_min_speed": [
"20"
],
"overhang_fan_speed_0": [
"100"
],
"overhang_fan_speed_1": [
"100"
],
"overhang_fan_speed_2": [
"0"
],
"overhang_fan_speed_3": [
"0"
],
"slow_down_layer_time": [
"8"
],
"fan_cooling_layer_time": [
"40"
],
"enable_dynamic_fan_speeds": [
"1"
],
"compatible_printers_condition": [
"printer_model=~/(COREONE|COREONEOAK|COREONEMMU3|COREONEL|COREONELMMU3)/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and ! nozzle_high_flow[0]"
],
"idle_temperature": [
"170"
],
"filament_load_time": [
"10.9"
],
"chamber_temperature": [
"20"
],
"filament_unload_time": [
"8.9"
],
"chamber_minimal_temperature": [
"0"
],
"name": "*PLAPGC1*",
"filament_settings_id": [
"*PLAPGC1*"
],
"type": "filament"
}
Version history
View full history with diffs →- v1 created 2026-05-19 11:27