Generic PLA @4Max Pro 2.0
Generic · PLA
· by flsun-system
· 0 downloads
Inheritance
-
*common_4max*
→
*PLA_4max*
→
Generic PLA @4Max Pro 2.0
Settings
Basic information
- Material variant
-
PLA inherited
- Vendor
-
Generic overridden
- Diameter (mm)
-
1.75 inherited
- Density (g/cm³)
-
1.24 inherited
Print temperature
- Nozzle (initial layer) (°C)
-
210 inherited
- Nozzle (other layers) (°C)
-
205 inherited
Cooling
- Fan minimum (%)
-
80 inherited
- Fan maximum (%)
-
100 inherited
- Disable fan for first N layers
-
1 inherited
- Full fan if layer below (sec)
-
30 inherited
- Slow down if layer below (sec)
-
15 inherited
- Min speed when slowed (mm/s)
-
10 inherited
Flow
- Flow ratio
-
1 inherited
- Max volumetric speed (mm³/s)
-
0 inherited
Bed temperature
| Plate | Initial layer (°C) | Other layers (°C) |
|---|---|---|
| High Temp Plate |
60
inherited
|
60
inherited
|
Other settings
- bridge fan speed
-
100 inherited
- compatible printers condition
-
printer_model=="4MAXPRO20" inherited
- cooling
-
1 inherited
- fan always on
-
1 inherited
- full fan speed layer
-
5 inherited
Raw resolved JSON
{
"cooling": [
"1"
],
"fan_always_on": [
"1"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"80"
],
"filament_type": [
"PLA"
],
"hot_plate_temp": [
"60"
],
"bridge_fan_speed": [
"100"
],
"filament_density": [
"1.24"
],
"filament_diameter": [
"1.75"
],
"nozzle_temperature": [
"205"
],
"filament_flow_ratio": [
"1"
],
"slow_down_min_speed": [
"10"
],
"full_fan_speed_layer": [
"5"
],
"slow_down_layer_time": [
"15"
],
"fan_cooling_layer_time": [
"30"
],
"close_fan_the_first_x_layers": [
"1"
],
"hot_plate_temp_initial_layer": [
"60"
],
"compatible_printers_condition": [
"printer_model==\"4MAXPRO20\""
],
"filament_max_volumetric_speed": [
"0"
],
"nozzle_temperature_initial_layer": [
"210"
],
"filament_vendor": [
"Generic"
],
"name": "Generic PLA @4Max Pro 2.0",
"filament_settings_id": [
"Generic PLA @4Max Pro 2.0"
],
"type": "filament"
}