Ultrafuse HIPS @MINI

BASF · HIPS · by super-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

→

→

→

→

Ultrafuse HIPS @MINI

Includes (1)

Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.

*ABSMINI*

Settings

Basic information

Material variant: HIPS overridden
was HIPS (inherited)
Vendor: BASF inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.02 inherited

Print temperature

Nozzle (initial layer) (°C): 255 inherited
Nozzle (other layers) (°C): 250 inherited

Cooling

Fan minimum (%): 20 overridden
was 20 (inherited)
Fan maximum (%): 20 overridden
was 20 (inherited)
Disable fan for first N layers: 3 inherited
Full fan if layer below (sec): 30 inherited
Slow down if layer below (sec): 20 via *ABSMINI*
Min speed when slowed (mm/s): 15 inherited

Flow

Flow ratio: 1 inherited
Max volumetric speed (mm³/s): 10 via *ABSMINI*

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
High Temp Plate	100 via include	100 via include

Other settings

bridge fan speed: 25 inherited
compatible printers condition: printer_model=="MINI" via *ABSMINI*
cooling: 1 inherited
fan always on: 0 inherited
filament colour: #FFFFFF inherited
filament cooling final speed: 3.4 inherited
filament cooling initial speed: 2.2 inherited
filament cooling moves: 4 inherited
filament deretract speed: nil via *ABSMINI*
filament load time: 0 inherited
filament loading speed: 28 inherited
filament loading speed start: 3 inherited
filament minimal purge on wipe tower: 15 inherited
filament notes: Material Description Ultrafuse HIPS is a high-quality engineering thermoplastic, which is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing. HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HIPS is an easy breakaway support. Now you have the opportunity to create ABS models with complex geometry. HIPS is easy to post process with glue or with sanding paper. inherited
filament ramming parameters: 120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6 inherited
filament retract before travel: 3 via *ABSMINI*
filament retract layer change: 0 inherited
filament retract length: 2.7 via *ABSMINI*
filament retract lift: nil via *ABSMINI*
filament retract speed: nil via *ABSMINI*
filament soluble: 1 inherited
filament toolchange delay: 0 inherited
filament unload time: 0 inherited
filament unloading speed: 90 inherited
filament unloading speed start: 100 inherited
filament wipe: 0 via *ABSMINI*
start filament gcode: M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode via *ABSMINI*

Raw resolved JSON

{
  "cooling": [
    "1"
  ],
  "filament_cost": [
    ""
  ],
  "filament_notes": [
    "Material Description\nUltrafuse HIPS is a high-quality engineering thermoplastic, which is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing. HiPS is a great material to use as a support for ABS because there is a good compatibility between the two materials, and HIPS is an easy breakaway support. Now you have the opportunity to create ABS models with complex geometry. HIPS is easy to post process with glue or with sanding paper."
  ],
  "filament_density": [
    "1.02"
  ],
  "filament_soluble": [
    "1"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "end_filament_gcode": [
    ""
  ],
  "filament_load_time": [
    "0"
  ],
  "compatible_printers": [
    ""
  ],
  "filament_flow_ratio": [
    "1"
  ],
  "slow_down_min_speed": [
    "15"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_unload_time": [
    "0"
  ],
  "slow_down_layer_time": [
    "20"
  ],
  "start_filament_gcode": [
    "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode"
  ],
  "filament_cooling_moves": [
    "4"
  ],
  "filament_loading_speed": [
    "28"
  ],
  "filament_unloading_speed": [
    "90"
  ],
  "filament_toolchange_delay": [
    "0"
  ],
  "filament_ramming_parameters": [
    "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  ],
  "filament_cooling_final_speed": [
    "3.4"
  ],
  "filament_loading_speed_start": [
    "3"
  ],
  "compatible_printers_condition": [
    "printer_model==\"MINI\""
  ],
  "filament_cooling_initial_speed": [
    "2.2"
  ],
  "filament_unloading_speed_start": [
    "100"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "fan_always_on": [
    "0"
  ],
  "fan_max_speed": [
    "20"
  ],
  "fan_min_speed": [
    "20"
  ],
  "filament_type": [
    "HIPS"
  ],
  "hot_plate_temp": [
    "100"
  ],
  "filament_colour": [
    "#FFFFFF"
  ],
  "bridge_fan_speed": [
    "25"
  ],
  "nozzle_temperature": [
    "250"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "hot_plate_temp_initial_layer": [
    "100"
  ],
  "filament_max_volumetric_speed": [
    "10"
  ],
  "nozzle_temperature_initial_layer": [
    "255"
  ],
  "filament_wipe": [
    "0"
  ],
  "filament_vendor": [
    "BASF"
  ],
  "filament_retract_layer_change": [
    "0"
  ],
  "filament_retract_before_travel": [
    "3"
  ],
  "filament_retract_lift": [
    "nil"
  ],
  "filament_retract_speed": [
    "nil"
  ],
  "filament_retract_length": [
    "2.7"
  ],
  "filament_deretract_speed": [
    "nil"
  ],
  "name": "Ultrafuse HIPS @MINI",
  "type": "filament"
}