*ABS06HFC1*
Unknown · OTHER
· by prusa-system
· 0 downloads
Inheritance
-
*ABS06HF4S*
→
*ABS06HFC1*
Includes (2)
Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.
Settings
Print temperature
- Chamber (°C)
-
55 via *C1_CH_ABS*
Cooling
- Fan minimum (%)
-
15 overriddenwas 10 (inherited)
- Fan maximum (%)
-
20 overriddenwas 15 (inherited)
- Full fan if layer below (sec)
-
30 overridden
Other settings
- bridge fan speed
-
25 overriddenwas 20 (inherited)
- chamber minimal temperature
-
40 via *C1_CH_ABS*
- compatible printers condition
-
printer_model=~/(COREONE|COREONEOAK|COREONEL)/ and nozzle_diameter[0]==0.6 and nozzle_high_flow[0] and ! single_extruder_multi_material overriddenwas printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]==0.6 and nozzle_high_flow[0] and ! single_extruder_multi_material (inherited)
- filament load time
-
10.9 via *C1_CH_ABS*
- filament shrinkage compensation xy
-
0.22% via *C1_SH_ABS*
- filament shrinkage compensation z
-
0.22% via *C1_SH_ABS*
- filament unload time
-
8.9 via *C1_CH_ABS*
- idle temperature
-
130 via *C1_CH_ABS*
Raw resolved JSON
{
"fan_max_speed": [
"20"
],
"fan_min_speed": [
"15"
],
"bridge_fan_speed": [
"25"
],
"compatible_printers_condition": [
"printer_model=~/(COREONE|COREONEOAK|COREONEL)/ and nozzle_diameter[0]==0.6 and nozzle_high_flow[0] and ! single_extruder_multi_material"
],
"idle_temperature": [
"130"
],
"filament_load_time": [
"10.9"
],
"chamber_temperature": [
"55"
],
"filament_unload_time": [
"8.9"
],
"chamber_minimal_temperature": [
"40"
],
"filament_shrinkage_compensation_z": [
"0.22%"
],
"filament_shrinkage_compensation_xy": [
"0.22%"
],
"fan_cooling_layer_time": [
"30"
],
"name": "*ABS06HFC1*",
"filament_settings_id": [
"*ABS06HFC1*"
],
"type": "filament"
}
Version history
View full history with diffs →- v1 created 2026-05-19 11:27