Push Plastic PC @HSP1

Unknown · PC · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

→

Push Plastic PC @HSP1

Includes (1)

Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.

*Push Plastic*

Settings

Basic information

Vendor: Push Plastic via *Push Plastic*
Density (g/cm³): 1.19 overridden
Cost (/kg): 54.00 overridden

Print temperature

Nozzle (initial layer) (°C): 255 overridden
Nozzle (other layers) (°C): 260 overridden

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
High Temp Plate	100 overridden	100 overridden

Other settings

filament spool weight: 350 overridden
start filament gcode: ; Filament gcode {if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0} {elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0} {elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0} {elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0} {endif} {if printer_notes=~/.*DUPLICATOR_MODE.*/} M572 D0:1 S{pressure_advance} {else} M572 D{current_extruder} S{pressure_advance} {endif} overridden
was {if printer_notes!~/.*(MK3.5|MINIIS).*/} M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5 {if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0 {endif} {if printer_notes=~/.*MINIIS.*/} M572 S{if nozzle_diameter[0]==0.6}0.2{elsif nozzle_diameter[0]==0.8}0.09{elsif nozzle_diameter[0]==0.4}0.35{elsif nozzle_diameter[0]==0.25}0.98{else}0{endif} {endif} {if printer_notes=~/.*MK3.5.*/} M572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.6}0.022{elsif nozzle_diameter[0]==0.8}0.016{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.09{else}0{endif} ; Filament gcode {endif} (inherited)

Raw resolved JSON

{
  "start_filament_gcode": [
    "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
  ],
  "filament_vendor": [
    "Push Plastic"
  ],
  "filament_spool_weight": [
    "350"
  ],
  "filament_cost": [
    "54.00"
  ],
  "hot_plate_temp": [
    "100"
  ],
  "filament_density": [
    "1.19"
  ],
  "nozzle_temperature": [
    "260"
  ],
  "hot_plate_temp_initial_layer": [
    "100"
  ],
  "nozzle_temperature_initial_layer": [
    "255"
  ],
  "name": "Push Plastic PC @HSP1",
  "filament_settings_id": [
    "Push Plastic PC @HSP1"
  ],
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 11:26