PCHFXL

Unknown · OTHER · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

*PCXL*

→

*PCHFXL*

Settings

Flow

Max volumetric speed (mm³/s): 22 overridden

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
High Temp Plate	100 inherited	105 inherited

Other settings

compatible printers condition: printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.5 and printer_notes=~/.*HF_NOZZLE.*/ overridden
was printer_model=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and printer_notes!~/.*HF_NOZZLE.*/ (inherited)
cooling perimeter transition distance: 10 inherited
cooling slowdown logic: consistent_surface inherited
filament infill max crossing speed: 100 overridden
filament infill max speed: 200 overridden
filament minimal purge on wipe tower: 35 inherited
filament multitool ramming: 1 inherited
filament multitool ramming flow: 40 inherited
filament multitool ramming volume: 10 inherited
filament retract length toolchange: 20 inherited
filament travel max lift: 1.5 inherited
filament travel ramping lift: 1 inherited
filament travel slope: 1 inherited
idle temperature: 150 inherited

Raw resolved JSON

{
  "hot_plate_temp": [
    "105"
  ],
  "idle_temperature": [
    "150"
  ],
  "filament_travel_slope": [
    "1"
  ],
  "cooling_slowdown_logic": [
    "consistent_surface"
  ],
  "filament_travel_max_lift": [
    "1.5"
  ],
  "filament_multitool_ramming": [
    "1"
  ],
  "filament_travel_ramping_lift": [
    "1"
  ],
  "hot_plate_temp_initial_layer": [
    "100"
  ],
  "compatible_printers_condition": [
    "printer_notes=~/.*XL.*/ and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.5 and printer_notes=~/.*HF_NOZZLE.*/"
  ],
  "filament_multitool_ramming_flow": [
    "40"
  ],
  "filament_multitool_ramming_volume": [
    "10"
  ],
  "filament_retract_length_toolchange": [
    "20"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "35"
  ],
  "cooling_perimeter_transition_distance": [
    "10"
  ],
  "filament_infill_max_speed": [
    "200"
  ],
  "filament_max_volumetric_speed": [
    "22"
  ],
  "filament_infill_max_crossing_speed": [
    "100"
  ],
  "name": "*PCHFXL*",
  "filament_settings_id": [
    "*PCHFXL*"
  ],
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 11:09