*PETHF4S*
Unknown · OTHER
· by prusa-system
· 0 downloads
Inherited from this (1)
Settings
Cooling
- Fan minimum (%)
-
20 overridden
- Fan maximum (%)
-
40 overridden
- Full fan if layer below (sec)
-
20 overridden
- Slow down if layer below (sec)
-
7 overridden
Other settings
- bridge fan speed
-
40 overridden
- compatible printers condition
-
printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.5 and nozzle_high_flow[0] overridden
- enable dynamic fan speeds
-
1 overridden
- filament ramming parameters
-
250 100 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387 overridden
- overhang fan speed 0
-
40 overridden
Raw resolved JSON
{
"fan_max_speed": [
"40"
],
"fan_min_speed": [
"20"
],
"bridge_fan_speed": [
"40"
],
"overhang_fan_speed_0": [
"40"
],
"slow_down_layer_time": [
"7"
],
"fan_cooling_layer_time": [
"20"
],
"enable_dynamic_fan_speeds": [
"1"
],
"filament_ramming_parameters": [
"250 100 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
],
"compatible_printers_condition": [
"printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.5 and nozzle_high_flow[0]"
],
"name": "*PETHF4S*",
"filament_settings_id": [
"*PETHF4S*"
],
"type": "filament"
}
Version history
View full history with diffs →- v1 created 2026-05-19 11:08