PLA08PG4S

Unknown · OTHER · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

*PLAPG4S*

→

*PLA08PG4S*

Settings

Cooling

Fan minimum (%): 80 overridden
was 70 (inherited)
Fan maximum (%): 100 inherited
Full fan if layer below (sec): 25 overridden
was 17 (inherited)
Slow down if layer below (sec): 15 overridden
was 6 (inherited)
Min speed when slowed (mm/s): 20 inherited

Other settings

bridge fan speed: 100 inherited
compatible printers condition: printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0] overridden
was printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and ! nozzle_high_flow[0] (inherited)
enable dynamic fan speeds: 1 inherited
overhang fan speed 0: 100 inherited
overhang fan speed 1: 100 inherited
overhang fan speed 2: 0 inherited
overhang fan speed 3: 0 inherited

Raw resolved JSON

{
  "fan_max_speed": [
    "100"
  ],
  "fan_min_speed": [
    "80"
  ],
  "bridge_fan_speed": [
    "100"
  ],
  "slow_down_min_speed": [
    "20"
  ],
  "overhang_fan_speed_0": [
    "100"
  ],
  "overhang_fan_speed_1": [
    "100"
  ],
  "overhang_fan_speed_2": [
    "0"
  ],
  "overhang_fan_speed_3": [
    "0"
  ],
  "slow_down_layer_time": [
    "15"
  ],
  "fan_cooling_layer_time": [
    "25"
  ],
  "enable_dynamic_fan_speeds": [
    "1"
  ],
  "compatible_printers_condition": [
    "printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]==0.8 and ! nozzle_high_flow[0]"
  ],
  "name": "*PLA08PG4S*",
  "filament_settings_id": [
    "*PLA08PG4S*"
  ],
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 11:08