ColorFabb XT-CF20 @MEGA

ColorFabb · PETG · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

*common_mega*

→

*PETG_mega*

→

ColorFabb XT-CF20 @MEGA

Settings

Basic information

Material variant: PETG inherited
Vendor: ColorFabb overridden
was Generic (inherited)
Density (g/cm³): 1.35 overridden
was 1.27 (inherited)
Cost (/kg): 66.60 overridden
was 27.82 (inherited)

Print temperature

Nozzle (initial layer) (°C): 260 overridden
was 230 (inherited)
Nozzle (other layers) (°C): 260 overridden
was 240 (inherited)

Cooling

Fan minimum (%): 30 inherited
Fan maximum (%): 50 inherited
Full fan if layer below (sec): 20 inherited
Slow down if layer below (sec): 15 overridden
was 20 (inherited)
Min speed when slowed (mm/s): 15 inherited

Flow

Flow ratio: 1.05 overridden
Max volumetric speed (mm³/s): 2 overridden
was 8 (inherited)

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
High Temp Plate	90 inherited	90 inherited

Other settings

bridge fan speed: 50 inherited
compatible printers condition: nozzle_diameter[0]>=0.4 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ overridden
was printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ (inherited)
end filament gcode: ; Filament-specific end gcode inherited
fan always on: 1 inherited
filament colour: #804040 overridden
was #FF8000 (inherited)
filament deretract speed: 25 overridden
filament notes: Based on colorFabb_XT, XT-CF20 is a carbon fiber composite material. Loaded with no less than 20% specially sourced carbon fibers we have developed a very stiff and tough 3D printing filament made for functional parts. It is truly a professional printers go-to material, especially for users looking for high melt strength, high melt viscosity and good dimensional accuracy and stability. https://colorfabb.com/xt-cf20 overridden
filament retract before travel: 1 overridden
filament retract length: 1.4 overridden
filament retract speed: 40 overridden
filament spool weight: 236 overridden
full fan speed layer: 5 overridden

Raw resolved JSON

{
  "fan_always_on": [
    "1"
  ],
  "filament_vendor": [
    "ColorFabb"
  ],
  "end_filament_gcode": [
    "; Filament-specific end gcode"
  ],
  "slow_down_min_speed": [
    "15"
  ],
  "slow_down_layer_time": [
    "15"
  ],
  "fan_cooling_layer_time": [
    "20"
  ],
  "compatible_printers_condition": [
    "nozzle_diameter[0]>=0.4 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/"
  ],
  "fan_max_speed": [
    "50"
  ],
  "fan_min_speed": [
    "30"
  ],
  "filament_cost": [
    "66.60"
  ],
  "filament_type": [
    "PETG"
  ],
  "hot_plate_temp": [
    "90"
  ],
  "filament_colour": [
    "#804040"
  ],
  "bridge_fan_speed": [
    "50"
  ],
  "filament_density": [
    "1.35"
  ],
  "nozzle_temperature": [
    "260"
  ],
  "hot_plate_temp_initial_layer": [
    "90"
  ],
  "filament_max_volumetric_speed": [
    "2"
  ],
  "nozzle_temperature_initial_layer": [
    "260"
  ],
  "filament_notes": [
    "Based on colorFabb_XT, XT-CF20 is a carbon fiber composite material. Loaded with no less than 20% specially sourced carbon fibers we have developed a very stiff and tough 3D printing filament made for functional parts. It is truly a professional printers go-to material, especially for users looking for high melt strength, high melt viscosity and good dimensional accuracy and stability.\n\nhttps://colorfabb.com/xt-cf20"
  ],
  "filament_flow_ratio": [
    "1.05"
  ],
  "full_fan_speed_layer": [
    "5"
  ],
  "filament_spool_weight": [
    "236"
  ],
  "filament_retract_speed": [
    "40"
  ],
  "filament_retract_length": [
    "1.4"
  ],
  "filament_deretract_speed": [
    "25"
  ],
  "filament_retract_before_travel": [
    "1"
  ],
  "name": "ColorFabb XT-CF20 @MEGA",
  "filament_settings_id": [
    "ColorFabb XT-CF20 @MEGA"
  ],
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 05:17