SainSmart TPU @MEGA

SainSmart · FLEX · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

*common_mega*

→

*FLEX_mega*

→

SainSmart TPU @MEGA

Settings

Basic information

Material variant: FLEX inherited
Vendor: SainSmart overridden
was Generic (inherited)
Density (g/cm³): 1.21 overridden
was 1.22 (inherited)
Cost (/kg): 39.99 overridden
was 82.00 (inherited)

Print temperature

Nozzle (initial layer) (°C): 235 overridden
was 240 (inherited)
Nozzle (other layers) (°C): 235 overridden
was 240 (inherited)

Cooling

Fan minimum (%): 80 overridden
was 70 (inherited)
Fan maximum (%): 80 overridden
was 90 (inherited)
Disable fan for first N layers: 4 overridden
Full fan if layer below (sec): 100 inherited
Slow down if layer below (sec): 10 overridden
was 20 (inherited)
Min speed when slowed (mm/s): 15 inherited

Flow

Flow ratio: 1.15 inherited
Max volumetric speed (mm³/s): 1.8 overridden
was 1.2 (inherited)

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
High Temp Plate	55 overridden was 55	50 overridden was 50

Other settings

bridge fan speed: 100 overridden
was 80 (inherited)
compatible printers condition: printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ inherited
cooling: 1 overridden
was 0 (inherited)
end filament gcode: ; Filament-specific end gcode inherited
fan always on: 0 inherited
filament colour: #008000 inherited
filament deretract speed: 15 overridden
was 25 (inherited)
filament notes: SainSmart TPU gains popularity among 3D Printing community for its balance of rigidity and flexibility. In addition, with a 95A Shore Hardness and improved bed adhesion, it is easier to print even with a stock elementary 3D Printer like the Creality Ender 3. SainSmart TPU will not disappoint if you are looking for flexible filament. From drone parts, phone cases, to small toys, all can be printed with ease. https://www.sainsmart.com/collections/tpu-filament/products/all-colors-tpu-flexible-filament-1-75mm-0-8kg-1-76lb overridden
filament retract before travel: 5 overridden
filament retract length: 4 overridden
was 0.8 (inherited)
filament retract speed: 40 overridden
filament unloading speed: 90 overridden
full fan speed layer: 6 overridden

Raw resolved JSON

{
  "fan_always_on": [
    "0"
  ],
  "filament_vendor": [
    "SainSmart"
  ],
  "end_filament_gcode": [
    "; Filament-specific end gcode"
  ],
  "slow_down_min_speed": [
    "15"
  ],
  "slow_down_layer_time": [
    "10"
  ],
  "fan_cooling_layer_time": [
    "100"
  ],
  "compatible_printers_condition": [
    "printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/"
  ],
  "cooling": [
    "1"
  ],
  "fan_max_speed": [
    "80"
  ],
  "fan_min_speed": [
    "80"
  ],
  "filament_cost": [
    "39.99"
  ],
  "filament_type": [
    "FLEX"
  ],
  "hot_plate_temp": [
    "50"
  ],
  "filament_colour": [
    "#008000"
  ],
  "bridge_fan_speed": [
    "100"
  ],
  "filament_density": [
    "1.21"
  ],
  "nozzle_temperature": [
    "235"
  ],
  "filament_flow_ratio": [
    "1.15"
  ],
  "filament_retract_length": [
    "4"
  ],
  "filament_deretract_speed": [
    "15"
  ],
  "hot_plate_temp_initial_layer": [
    "55"
  ],
  "filament_max_volumetric_speed": [
    "1.8"
  ],
  "nozzle_temperature_initial_layer": [
    "235"
  ],
  "filament_notes": [
    "SainSmart TPU gains popularity among 3D Printing community for its balance of rigidity and flexibility. In addition, with a 95A Shore Hardness and improved bed adhesion, it is easier to print even with a stock elementary 3D Printer like the Creality Ender 3. SainSmart TPU will not disappoint if you are looking for flexible filament. From drone parts, phone cases, to small toys, all can be printed with ease.\n\nhttps://www.sainsmart.com/collections/tpu-filament/products/all-colors-tpu-flexible-filament-1-75mm-0-8kg-1-76lb"
  ],
  "full_fan_speed_layer": [
    "6"
  ],
  "filament_retract_speed": [
    "40"
  ],
  "filament_unloading_speed": [
    "90"
  ],
  "close_fan_the_first_x_layers": [
    "4"
  ],
  "filament_retract_before_travel": [
    "5"
  ],
  "name": "SainSmart TPU @MEGA",
  "filament_settings_id": [
    "SainSmart TPU @MEGA"
  ],
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 05:17