Generic ABS @Creality

Generic · ABS · by bambu-system · 1 download

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_abs

→

Generic ABS @Creality

Compatible printers (24)

Creality CR-10 Max 0.4 nozzle
Creality CR-10 V2 0.4 nozzle
Creality Ender-3 S1 0.4 nozzle
Creality Ender-3 S1 Pro 0.4 nozzle
Creality Ender-3 V2 0.4 nozzle
Creality Ender-3 V3 0.4 nozzle
Creality Ender-3 V3 0.6 nozzle
Creality Ender-3 V3 KE 0.4 nozzle
Creality Ender-3 V3 Plus 0.4 nozzle
Creality Ender-3 V3 Plus 0.6 nozzle
Creality Ender-5 0.4 nozzle
Creality Ender-5 Plus 0.4 nozzle
Creality Ender-5S 0.4 nozzle
Creality Ender-5 S1 0.4 nozzle
Creality Ender-6 0.4 nozzle
Creality K1 0.4 nozzle
Creality K1 0.6 nozzle
Creality K1 0.8 nozzle
Creality K1C 0.4 nozzle
Creality K1C 0.6 nozzle
Creality K1C 0.8 nozzle
Creality K1 Max 0.4 nozzle
Creality K1 Max 0.6 nozzle
Creality K1 Max 0.8 nozzle

Settings

Basic information

Material variant: ABS inherited
Vendor: Generic inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.04 inherited
Cost (/kg): 20 inherited

Print temperature

Nozzle (initial layer) (°C): 240 inherited
Nozzle (other layers) (°C): 240 inherited

Cooling

Fan minimum (%): 10 inherited
Fan maximum (%): 80 inherited
Disable fan for first N layers: 3 inherited
Full fan if layer below (sec): 30 inherited
Slow down if layer below (sec): 3 inherited
Min speed when slowed (mm/s): 10 inherited

Flow

Flow ratio: 0.926 overridden
was 1 (inherited)
Max volumetric speed (mm³/s): 12 overridden
was 28.6 (inherited)

Retraction

Retraction length (mm): nil inherited
Retraction speed (mm/s): nil inherited
Deretraction speed (mm/s): nil inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	95 inherited	95 inherited
Engineering Plate	95 inherited	95 inherited
High Temp Plate	95 inherited	95 inherited

Other settings

additional fan full speed layer: 0 inherited
close additional fan first x layers: 3 inherited
compatible printers: Creality CR-10 V2 0.4 nozzle, Creality CR-10 Max 0.4 nozzle, Creality Ender-3 V2 0.4 nozzle, Creality Ender-3 S1 0.4 nozzle, Creality Ender-3 S1 Pro 0.4 nozzle, Creality Ender-3 V3 0.4 nozzle, Creality Ender-3 V3 0.6 nozzle, Creality Ender-3 V3 KE 0.4 nozzle, Creality Ender-3 V3 Plus 0.4 nozzle, Creality Ender-3 V3 Plus 0.6 nozzle, Creality Ender-5 0.4 nozzle, Creality Ender-5 Plus 0.4 nozzle, Creality Ender-5S 0.4 nozzle, Creality Ender-5 S1 0.4 nozzle, Creality Ender-6 0.4 nozzle, Creality K1 0.4 nozzle, Creality K1 0.6 nozzle, Creality K1 0.8 nozzle, Creality K1 Max 0.4 nozzle, Creality K1 Max 0.6 nozzle, Creality K1 Max 0.8 nozzle, Creality K1C 0.4 nozzle, Creality K1C 0.6 nozzle, Creality K1C 0.8 nozzle overridden
filament id: GFB99 overridden
filament is support: 0 inherited
filament minimal purge on wipe tower: 15 inherited
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: nil inherited
filament retraction minimum travel: nil inherited
filament soluble: 0 inherited
filament wipe: nil inherited
filament wipe distance: nil inherited
filament z hop: nil inherited
full fan speed layer: 0 inherited
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 270 inherited
nozzle temperature range low: 240 inherited
overhang fan speed: 80 inherited
overhang fan threshold: 25% inherited
reduce fan stop start freq: 1 inherited
required nozzle HRC: 3 inherited
setting id: GFSB99_CREALITY_00 overridden
slow down for layer cooling: 1 inherited
temperature vitrification: 110 inherited

Raw resolved JSON

{
  "type": "filament",
  "fan_max_speed": [
    "80"
  ],
  "fan_min_speed": [
    "10"
  ],
  "filament_cost": [
    "20"
  ],
  "filament_type": [
    "ABS"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "95"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "95"
  ],
  "cool_plate_temp": [
    "95"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.04"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "240"
  ],
  "overhang_fan_speed": [
    "80"
  ],
  "filament_flow_ratio": [
    "0.926"
  ],
  "filament_is_support": [
    "0"
  ],
  "required_nozzle_HRC": [
    "3"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; Filament gcode\n"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "3"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "110"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "eng_plate_temp_initial_layer": [
    "95"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "95"
  ],
  "cool_plate_temp_initial_layer": [
    "95"
  ],
  "filament_max_volumetric_speed": [
    "12"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "additional_fan_full_speed_layer": [
    "0"
  ],
  "nozzle_temperature_initial_layer": [
    "240"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "close_additional_fan_first_x_layers": [
    "3"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "nozzle_temperature_range_low": [
    "240"
  ],
  "nozzle_temperature_range_high": [
    "270"
  ],
  "setting_id": "GFSB99_CREALITY_00",
  "filament_id": "GFB99",
  "compatible_printers": [
    "Creality CR-10 V2 0.4 nozzle",
    "Creality CR-10 Max 0.4 nozzle",
    "Creality Ender-3 V2 0.4 nozzle",
    "Creality Ender-3 S1 0.4 nozzle",
    "Creality Ender-3 S1 Pro 0.4 nozzle",
    "Creality Ender-3 V3 0.4 nozzle",
    "Creality Ender-3 V3 0.6 nozzle",
    "Creality Ender-3 V3 KE 0.4 nozzle",
    "Creality Ender-3 V3 Plus 0.4 nozzle",
    "Creality Ender-3 V3 Plus 0.6 nozzle",
    "Creality Ender-5 0.4 nozzle",
    "Creality Ender-5 Plus 0.4 nozzle",
    "Creality Ender-5S 0.4 nozzle",
    "Creality Ender-5 S1 0.4 nozzle",
    "Creality Ender-6 0.4 nozzle",
    "Creality K1 0.4 nozzle",
    "Creality K1 0.6 nozzle",
    "Creality K1 0.8 nozzle",
    "Creality K1 Max 0.4 nozzle",
    "Creality K1 Max 0.6 nozzle",
    "Creality K1 Max 0.8 nozzle",
    "Creality K1C 0.4 nozzle",
    "Creality K1C 0.6 nozzle",
    "Creality K1C 0.8 nozzle"
  ],
  "name": "Generic ABS @Creality"
}

Version history

View full history with diffs →

v1 created 2026-05-19 04:14