VXL90 TiQ2 P2 @iQ TiQ2 0.4 Nozzle

iQ Materials · VXL90 XIONEER · 0.40mm nozzle · by orca-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Strip G-code from download

Compare

Inheritance

fdm_filament_common

→

VXL90 TiQ2 P2 @iQ TiQ2 0.4 Nozzle

Compatible printers (1)

iQ TiQ2 0.4 Nozzle

Settings

Basic information

Material variant: VXL90 Xioneer overridden
was PLA (inherited)
Vendor: iQ Materials overridden
was Generic (inherited)
Diameter (mm): 1.75 overridden
was 1.75 (inherited)
Density (g/cm³): 1.1 overridden
was 0 (inherited)
Cost (/kg): 150 overridden
was 0 (inherited)

Print temperature

Nozzle (initial layer) (°C): 235 overridden
was 200 (inherited)
Nozzle (other layers) (°C): 235 overridden
was 200 (inherited)

Cooling

Fan minimum (%): 10 overridden
was 35 (inherited)
Fan maximum (%): 80 overridden
was 100 (inherited)
Disable fan for first N layers: 3 overridden
was 3 (inherited)
Full fan if layer below (sec): 30 overridden
was 60 (inherited)
Slow down if layer below (sec): 3 overridden
was 8 (inherited)
Min speed when slowed (mm/s): 10 overridden
was 10 (inherited)

Flow

Flow ratio: 1 overridden
was 1 (inherited)
Max volumetric speed (mm³/s): 12 overridden
was 0 (inherited)

Retraction

Retraction length (mm): 4 overridden
was nil (inherited)
Retraction speed (mm/s): nil overridden
was nil (inherited)
Deretraction speed (mm/s): nil inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	60 inherited	60 inherited
Engineering Plate	60 inherited	60 inherited
High Temp Plate	100 overridden was 60	100 overridden was 60
Textured PEI Plate	60 inherited	60 inherited

Custom G-code

filament_start_gcode overridden

; Filament gcode
{if current_extruder==0}
G1 X-17 Y1 F9000
G1 Y45 F9000
G1 Y1 F9000
G1 Y45 F9000
{if layer_z==0}G1 Z{first_layer_height + 2.0}{endif}
{if layer_z==0}G1 X[first_layer_print_min_0] Y[first_layer_print_min_1]{endif}
{if layer_z==0}G1 Z{layer_z}{endif}
{endif}

{if current_extruder==1}
G1 X-23 Y3 F9000
G1 Y45 F9000
G1 Y3 F9000
G1 Y45 F9000
{endif}

filament_end_gcode overridden

; filament end gcode
{if current_extruder==0}
G1 Z{layer_z+2} F900 ; safe distance for T0 while tool change
G1 X-17 Y1 F9000
G1 X-17 Y45 F9000
G1 Y1 F9000
G1 Y45 F9000
{endif}

{if current_extruder==1}
{if current_extruder==0}T1{endif}
G1 X-23 Y3 F9000
G1 Y45 F9000
G1 Y3 F9000
G1 Y45 F9000
{endif}

Other settings

bed type: Cool Plate inherited
compatible printers: iQ TiQ2 0.4 Nozzle overridden
compatible prints: 0.20mm Standard @iQ TiQ2 P2 - PACF Pro Fiberthree + VXL90 Xioneer (0.4 Nozzle) overridden
complete print exhaust fan speed: 70 overridden
default filament colour: #FFFFFF overridden
during print exhaust fan speed: 70 overridden
enable pressure advance: 0 overridden
filament cooling final speed: 3.5 overridden
filament cooling initial speed: 10 overridden
filament cooling moves: 2 overridden
filament id: IQM1011 overridden
filament is support: 1 overridden
filament loading speed: 10 overridden
filament loading speed start: 50 overridden
filament minimal purge on wipe tower: 15 inherited
filament notes: Filament file version 1.0 20251103 overridden
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: nil inherited
filament retraction minimum travel: nil inherited
filament soluble: 1 overridden
was 0 (inherited)
filament stamping distance: 45 overridden
filament stamping loading speed: 29 overridden
filament toolchange delay: 0 overridden
filament unloading speed: 100 overridden
filament unloading speed start: 100 overridden
filament wipe: nil inherited
filament wipe distance: nil inherited
filament z hop: nil inherited
filament z hop types: nil inherited
full fan speed layer: 0 inherited
idle temperature: 205 overridden
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 250 overridden
nozzle temperature range low: 220 overridden
overhang fan speed: 80 overridden
was 100 (inherited)
overhang fan threshold: 25% overridden
was 95% (inherited)
reduce fan stop start freq: 0 inherited
setting id: IQS1011 overridden
slow down for layer cooling: 1 inherited
temperature vitrification: 110 overridden
was 100 (inherited)

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "80"
  ],
  "fan_min_speed": [
    "10"
  ],
  "filament_cost": [
    "150"
  ],
  "filament_type": [
    "VXL90 Xioneer"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "60"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "100"
  ],
  "cool_plate_temp": [
    "60"
  ],
  "filament_vendor": [
    "iQ Materials"
  ],
  "filament_density": [
    "1.1"
  ],
  "filament_soluble": [
    "1"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode\n{if current_extruder==0}\nG1 Z{layer_z+2} F900 ; safe distance for T0 while tool change\nG1 X-17 Y1 F9000\nG1 X-17 Y45 F9000\nG1 Y1 F9000\nG1 Y45 F9000\n{endif}\n\n{if current_extruder==1}\n{if current_extruder==0}T1{endif}\nG1 X-23 Y3 F9000\nG1 Y45 F9000\nG1 Y3 F9000\nG1 Y45 F9000\n{endif}"
  ],
  "nozzle_temperature": [
    "235"
  ],
  "overhang_fan_speed": [
    "80"
  ],
  "filament_flow_ratio": [
    "1"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "textured_plate_temp": [
    "60"
  ],
  "filament_settings_id": [
    "VXL90 TiQ2 P2 @iQ TiQ2 0.4 Nozzle"
  ],
  "filament_start_gcode": [
    "; Filament gcode\n{if current_extruder==0}\nG1 X-17 Y1 F9000\nG1 Y45 F9000\nG1 Y1 F9000\nG1 Y45 F9000\n{if layer_z==0}G1 Z{first_layer_height + 2.0}{endif}\n{if layer_z==0}G1 X[first_layer_print_min_0] Y[first_layer_print_min_1]{endif}\n{if layer_z==0}G1 Z{layer_z}{endif}\n{endif}\n\n{if current_extruder==1}\nG1 X-23 Y3 F9000\nG1 Y45 F9000\nG1 Y3 F9000\nG1 Y45 F9000\n{endif}"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "3"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "110"
  ],
  "filament_retraction_length": [
    "4"
  ],
  "reduce_fan_stop_start_freq": [
    "0"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "eng_plate_temp_initial_layer": [
    "60"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "100"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "filament_max_volumetric_speed": [
    "12"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "235"
  ],
  "textured_plate_temp_initial_layer": [
    "60"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "setting_id": "IQS1011",
  "filament_id": "IQM1011",
  "filament_notes": [
    "Filament file version 1.0 20251103"
  ],
  "idle_temperature": [
    "205"
  ],
  "compatible_prints": [
    "0.20mm Standard @iQ TiQ2 P2 - PACF Pro Fiberthree + VXL90 Xioneer (0.4 Nozzle)"
  ],
  "compatible_printers": [
    "iQ TiQ2 0.4 Nozzle"
  ],
  "filament_is_support": [
    "1"
  ],
  "filament_cooling_moves": [
    "2"
  ],
  "filament_loading_speed": [
    "10"
  ],
  "default_filament_colour": [
    "#FFFFFF"
  ],
  "enable_pressure_advance": [
    "0"
  ],
  "filament_unloading_speed": [
    "100"
  ],
  "filament_toolchange_delay": [
    "0"
  ],
  "filament_stamping_distance": [
    "45"
  ],
  "filament_cooling_final_speed": [
    "3.5"
  ],
  "filament_loading_speed_start": [
    "50"
  ],
  "nozzle_temperature_range_low": [
    "220"
  ],
  "nozzle_temperature_range_high": [
    "250"
  ],
  "during_print_exhaust_fan_speed": [
    "70"
  ],
  "filament_cooling_initial_speed": [
    "10"
  ],
  "filament_unloading_speed_start": [
    "100"
  ],
  "filament_stamping_loading_speed": [
    "29"
  ],
  "complete_print_exhaust_fan_speed": [
    "70"
  ],
  "name": "VXL90 TiQ2 P2 @iQ TiQ2 0.4 Nozzle"
}

Version history

View full history with diffs →

v1 created 2026-05-19 04:51