fdm_filament_common_S1
Generic · PLA
· by orca-system
· 0 downloads
Inherited from this (14)
View all 14 →Settings
Basic information
- Material variant
-
PLA overridden
- Vendor
-
Generic overridden
- Diameter (mm)
-
1.75 overridden
- Density (g/cm³)
-
0 overridden
- Cost (/kg)
-
0 overridden
Print temperature
- Nozzle (initial layer) (°C)
-
200 overridden
- Nozzle (other layers) (°C)
-
200 overridden
Cooling
- Fan minimum (%)
-
35 overridden
- Fan maximum (%)
-
100 overridden
- Disable fan for first N layers
-
3 overridden
- Full fan if layer below (sec)
-
60 overridden
- Slow down if layer below (sec)
-
8 overridden
- Min speed when slowed (mm/s)
-
10 overridden
Flow
- Flow ratio
-
1 overridden
- Max volumetric speed (mm³/s)
-
0 overridden
Retraction
- Retraction length (mm)
-
nil overridden
- Retraction speed (mm/s)
-
nil overridden
- Deretraction speed (mm/s)
-
nil overridden
Bed temperature
| Plate | Initial layer (°C) | Other layers (°C) |
|---|---|---|
| Cool Plate |
60
overridden
|
60
overridden
|
| Engineering Plate |
60
overridden
|
60
overridden
|
| High Temp Plate |
60
overridden
|
60
overridden
|
| Textured PEI Plate |
60
overridden
|
60
overridden
|
Other settings
- bed type
-
Cool Plate overridden
- filament minimal purge on wipe tower
-
15 overridden
- filament retract before wipe
-
nil overridden
- filament retract restart extra
-
nil overridden
- filament retract when changing layer
-
nil overridden
- filament retraction minimum travel
-
nil overridden
- filament soluble
-
0 overridden
- filament wipe
-
nil overridden
- filament wipe distance
-
nil overridden
- filament z hop
-
nil overridden
- filament z hop types
-
nil overridden
- full fan speed layer
-
0 overridden
- instantiation
-
false overridden
- overhang fan speed
-
100 overridden
- overhang fan threshold
-
0% overridden
- reduce fan stop start freq
-
0 overridden
- slow down for layer cooling
-
1 overridden
- temperature vitrification
-
100 overridden
Raw resolved JSON
{
"type": "filament",
"bed_type": [
"Cool Plate"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"35"
],
"filament_cost": [
"0"
],
"filament_type": [
"PLA"
],
"filament_wipe": [
"nil"
],
"instantiation": "false",
"eng_plate_temp": [
"60"
],
"filament_z_hop": [
"nil"
],
"hot_plate_temp": [
"60"
],
"cool_plate_temp": [
"60"
],
"filament_vendor": [
"Generic"
],
"filament_density": [
"0"
],
"filament_soluble": [
"0"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \n"
],
"nozzle_temperature": [
"200"
],
"overhang_fan_speed": [
"100"
],
"filament_flow_ratio": [
"1"
],
"slow_down_min_speed": [
"10"
],
"textured_plate_temp": [
"60"
],
"filament_settings_id": [
""
],
"filament_start_gcode": [
"; Filament gcode\n"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"slow_down_layer_time": [
"8"
],
"fan_cooling_layer_time": [
"60"
],
"filament_wipe_distance": [
"nil"
],
"overhang_fan_threshold": [
"0%"
],
"filament_retraction_speed": [
"nil"
],
"temperature_vitrification": [
"100"
],
"filament_retraction_length": [
"nil"
],
"reduce_fan_stop_start_freq": [
"0"
],
"filament_deretraction_speed": [
"nil"
],
"slow_down_for_layer_cooling": [
"1"
],
"close_fan_the_first_x_layers": [
"3"
],
"eng_plate_temp_initial_layer": [
"60"
],
"filament_retract_before_wipe": [
"nil"
],
"hot_plate_temp_initial_layer": [
"60"
],
"cool_plate_temp_initial_layer": [
"60"
],
"filament_max_volumetric_speed": [
"0"
],
"filament_retract_restart_extra": [
"nil"
],
"nozzle_temperature_initial_layer": [
"200"
],
"textured_plate_temp_initial_layer": [
"60"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_when_changing_layer": [
"nil"
],
"name": "fdm_filament_common_S1"
}
Version history
View full history with diffs →- v1 created 2026-05-19 04:48