Snapmaker J1 ABS Benchy

Generic · ABS · by orca-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_abs

→

Snapmaker J1 ABS @base

→

Snapmaker J1 ABS Benchy

Compatible printers (1)

Snapmaker J1 (0.4 nozzle)

Settings

Basic information

Material variant: ABS inherited
Vendor: Generic inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.24 inherited
Cost (/kg): 30 inherited

Print temperature

Nozzle (initial layer) (°C): 250 inherited
Nozzle (other layers) (°C): 250 overridden
was 250 (inherited)

Cooling

Fan minimum (%): 65 overridden
was 22 (inherited)
Fan maximum (%): 80 overridden
was 22 (inherited)
Disable fan for first N layers: 1 inherited
Full fan if layer below (sec): 2 overridden
was 5 (inherited)
Slow down if layer below (sec): 0 overridden
was 3 (inherited)
Min speed when slowed (mm/s): 0 overridden
was 30 (inherited)

Flow

Flow ratio: 0.95 inherited
Max volumetric speed (mm³/s): 31 overridden
was 9.6 (inherited)

Retraction

Retraction length (mm): 0.5 overridden
was nil (inherited)
Retraction speed (mm/s): 55 overridden
was nil (inherited)
Deretraction speed (mm/s): 55 overridden
was nil (inherited)

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	105 inherited	105 inherited
Engineering Plate	105 inherited	105 inherited
High Temp Plate	105 inherited	110 inherited
Textured PEI Plate	105 inherited	105 inherited

Other settings

additional cooling fan speed: 0 inherited
bed type: Cool Plate inherited
compatible printers: Snapmaker J1 (0.4 nozzle) overridden
compatible prints: 0.25 Benchy @Snapmaker J1 (0.4 nozzle) overridden
filament cooling final speed: 60 overridden
filament cooling initial speed: 35 overridden
filament cooling moves: 2 overridden
filament id: 1223824394 inherited
filament load time: 2 overridden
filament loading speed: 35 overridden
filament loading speed start: 35 overridden
filament minimal purge on wipe tower: 15 inherited
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: 0 overridden
was nil (inherited)
filament retraction minimum travel: nil inherited
filament soluble: 0 inherited
filament unload time: 2 overridden
filament unloading speed: 35 overridden
filament unloading speed start: 35 overridden
filament wipe: 0 overridden
was nil (inherited)
filament wipe distance: nil inherited
filament z hop: 0 overridden
was nil (inherited)
filament z hop types: nil inherited
full fan speed layer: 0 inherited
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 280 inherited
nozzle temperature range low: 240 inherited
overhang fan speed: 35 overridden
was 22 (inherited)
overhang fan threshold: 25% inherited
pressure advance: 0.02 inherited
reduce fan stop start freq: 1 inherited
setting id: 356879727 overridden
slow down for layer cooling: 0 overridden
was 1 (inherited)
temperature vitrification: 110 inherited

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "80"
  ],
  "fan_min_speed": [
    "65"
  ],
  "filament_cost": [
    "30"
  ],
  "filament_type": [
    "ABS"
  ],
  "filament_wipe": [
    "0"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "105"
  ],
  "filament_z_hop": [
    "0"
  ],
  "hot_plate_temp": [
    "110"
  ],
  "cool_plate_temp": [
    "105"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.24"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "250"
  ],
  "overhang_fan_speed": [
    "35"
  ],
  "filament_flow_ratio": [
    "0.95"
  ],
  "slow_down_min_speed": [
    "0"
  ],
  "textured_plate_temp": [
    "105"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; filament start gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "0"
  ],
  "fan_cooling_layer_time": [
    "2"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "filament_retraction_speed": [
    "55"
  ],
  "temperature_vitrification": [
    "110"
  ],
  "filament_retraction_length": [
    "0.5"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "55"
  ],
  "slow_down_for_layer_cooling": [
    "0"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "eng_plate_temp_initial_layer": [
    "105"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "105"
  ],
  "cool_plate_temp_initial_layer": [
    "105"
  ],
  "filament_max_volumetric_speed": [
    "31"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "250"
  ],
  "textured_plate_temp_initial_layer": [
    "105"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "0"
  ],
  "additional_cooling_fan_speed": [
    "0"
  ],
  "nozzle_temperature_range_low": [
    "240"
  ],
  "nozzle_temperature_range_high": [
    "280"
  ],
  "filament_id": "1223824394",
  "pressure_advance": [
    "0.02"
  ],
  "setting_id": "356879727",
  "compatible_prints": [
    "0.25 Benchy @Snapmaker J1 (0.4 nozzle)"
  ],
  "filament_load_time": [
    "2"
  ],
  "compatible_printers": [
    "Snapmaker J1 (0.4 nozzle)"
  ],
  "filament_unload_time": [
    "2"
  ],
  "filament_cooling_moves": [
    "2"
  ],
  "filament_loading_speed": [
    "35"
  ],
  "default_filament_colour": [
    ""
  ],
  "filament_unloading_speed": [
    "35"
  ],
  "filament_cooling_final_speed": [
    "60"
  ],
  "filament_loading_speed_start": [
    "35"
  ],
  "filament_cooling_initial_speed": [
    "35"
  ],
  "filament_unloading_speed_start": [
    "35"
  ],
  "name": "Snapmaker J1 ABS Benchy"
}

Version history

View full history with diffs →

v1 created 2026-05-19 04:47