Snapmaker PLA-CF

Generic · PLA-CF · by orca-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_pla

→

Snapmaker PLA-CF @base

→

Snapmaker PLA-CF

Compatible printers (24)

Snapmaker A250 (0.4 nozzle)
Snapmaker A250 (0.6 nozzle)
Snapmaker A250 (0.8 nozzle)
Snapmaker A250 BKit (0.4 nozzle)
Snapmaker A250 BKit (0.6 nozzle)
Snapmaker A250 BKit (0.8 nozzle)
Snapmaker A250 QS+B Kit (0.4 nozzle)
Snapmaker A250 QS+B Kit (0.6 nozzle)
Snapmaker A250 QS+B Kit (0.8 nozzle)
Snapmaker A250 QSKit (0.4 nozzle)
Snapmaker A250 QSKit (0.6 nozzle)
Snapmaker A250 QSKit (0.8 nozzle)
Snapmaker A350 (0.4 nozzle)
Snapmaker A350 (0.6 nozzle)
Snapmaker A350 (0.8 nozzle)
Snapmaker A350 BKit (0.4 nozzle)
Snapmaker A350 BKit (0.6 nozzle)
Snapmaker A350 BKit (0.8 nozzle)
Snapmaker A350 QS+B Kit (0.4 nozzle)
Snapmaker A350 QS+B Kit (0.6 nozzle)
Snapmaker A350 QS+B Kit (0.8 nozzle)
Snapmaker A350 QSKit (0.4 nozzle)
Snapmaker A350 QSKit (0.6 nozzle)
Snapmaker A350 QSKit (0.8 nozzle)

Settings

Basic information

Material variant: PLA-CF inherited
Vendor: Generic inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.24 inherited
Cost (/kg): 30 inherited

Print temperature

Nozzle (initial layer) (°C): 220 inherited
Nozzle (other layers) (°C): 220 inherited

Cooling

Fan minimum (%): 100 inherited
Fan maximum (%): 100 inherited
Disable fan for first N layers: 1 inherited
Full fan if layer below (sec): 100 inherited
Slow down if layer below (sec): 7 inherited
Min speed when slowed (mm/s): 5 inherited

Flow

Flow ratio: 0.95 inherited
Max volumetric speed (mm³/s): 12 inherited

Retraction

Retraction length (mm): nil inherited
Retraction speed (mm/s): nil inherited
Deretraction speed (mm/s): nil inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	50 inherited	50 inherited
Engineering Plate	50 inherited	50 inherited
High Temp Plate	50 inherited	50 inherited
Textured PEI Plate	50 inherited	50 inherited

Other settings

additional cooling fan speed: 0 inherited
bed type: Cool Plate inherited
compatible printers: Snapmaker A250 (0.4 nozzle), Snapmaker A250 (0.6 nozzle), Snapmaker A250 (0.8 nozzle), Snapmaker A250 BKit (0.4 nozzle), Snapmaker A250 BKit (0.6 nozzle), Snapmaker A250 BKit (0.8 nozzle), Snapmaker A250 QS+B Kit (0.4 nozzle), Snapmaker A250 QS+B Kit (0.6 nozzle), Snapmaker A250 QS+B Kit (0.8 nozzle), Snapmaker A250 QSKit (0.4 nozzle), Snapmaker A250 QSKit (0.6 nozzle), Snapmaker A250 QSKit (0.8 nozzle), Snapmaker A350 (0.4 nozzle), Snapmaker A350 (0.6 nozzle), Snapmaker A350 (0.8 nozzle), Snapmaker A350 BKit (0.4 nozzle), Snapmaker A350 BKit (0.6 nozzle), Snapmaker A350 BKit (0.8 nozzle), Snapmaker A350 QS+B Kit (0.4 nozzle), Snapmaker A350 QS+B Kit (0.6 nozzle), Snapmaker A350 QS+B Kit (0.8 nozzle), Snapmaker A350 QSKit (0.4 nozzle), Snapmaker A350 QSKit (0.6 nozzle), Snapmaker A350 QSKit (0.8 nozzle) overridden
filament id: 3864371306 inherited
filament minimal purge on wipe tower: 15 inherited
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: nil inherited
filament retraction minimum travel: nil inherited
filament soluble: 0 inherited
filament wipe: nil inherited
filament wipe distance: nil inherited
filament z hop: nil inherited
filament z hop types: nil inherited
full fan speed layer: 0 inherited
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 230 inherited
nozzle temperature range low: 190 inherited
overhang fan speed: 100 inherited
overhang fan threshold: 50% inherited
reduce fan stop start freq: 1 inherited
required nozzle HRC: 40 inherited
setting id: 4136003514 overridden
slow down for layer cooling: 1 inherited
temperature vitrification: 150 inherited

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "100"
  ],
  "fan_min_speed": [
    "100"
  ],
  "filament_cost": [
    "30"
  ],
  "filament_type": [
    "PLA-CF"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "50"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "50"
  ],
  "cool_plate_temp": [
    "50"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.24"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "220"
  ],
  "overhang_fan_speed": [
    "100"
  ],
  "filament_flow_ratio": [
    "0.95"
  ],
  "slow_down_min_speed": [
    "5"
  ],
  "textured_plate_temp": [
    "50"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; filament start gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "7"
  ],
  "fan_cooling_layer_time": [
    "100"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "50%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "150"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "eng_plate_temp_initial_layer": [
    "50"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "50"
  ],
  "cool_plate_temp_initial_layer": [
    "50"
  ],
  "filament_max_volumetric_speed": [
    "12"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "220"
  ],
  "textured_plate_temp_initial_layer": [
    "50"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "additional_cooling_fan_speed": [
    "0"
  ],
  "nozzle_temperature_range_low": [
    "190"
  ],
  "nozzle_temperature_range_high": [
    "230"
  ],
  "filament_id": "3864371306",
  "required_nozzle_HRC": [
    "40"
  ],
  "default_filament_colour": [
    ""
  ],
  "setting_id": "4136003514",
  "compatible_printers": [
    "Snapmaker A250 (0.4 nozzle)",
    "Snapmaker A250 (0.6 nozzle)",
    "Snapmaker A250 (0.8 nozzle)",
    "Snapmaker A250 BKit (0.4 nozzle)",
    "Snapmaker A250 BKit (0.6 nozzle)",
    "Snapmaker A250 BKit (0.8 nozzle)",
    "Snapmaker A250 QS+B Kit (0.4 nozzle)",
    "Snapmaker A250 QS+B Kit (0.6 nozzle)",
    "Snapmaker A250 QS+B Kit (0.8 nozzle)",
    "Snapmaker A250 QSKit (0.4 nozzle)",
    "Snapmaker A250 QSKit (0.6 nozzle)",
    "Snapmaker A250 QSKit (0.8 nozzle)",
    "Snapmaker A350 (0.4 nozzle)",
    "Snapmaker A350 (0.6 nozzle)",
    "Snapmaker A350 (0.8 nozzle)",
    "Snapmaker A350 BKit (0.4 nozzle)",
    "Snapmaker A350 BKit (0.6 nozzle)",
    "Snapmaker A350 BKit (0.8 nozzle)",
    "Snapmaker A350 QS+B Kit (0.4 nozzle)",
    "Snapmaker A350 QS+B Kit (0.6 nozzle)",
    "Snapmaker A350 QS+B Kit (0.8 nozzle)",
    "Snapmaker A350 QSKit (0.4 nozzle)",
    "Snapmaker A350 QSKit (0.6 nozzle)",
    "Snapmaker A350 QSKit (0.8 nozzle)"
  ],
  "name": "Snapmaker PLA-CF"
}

Version history

View full history with diffs →

v1 created 2026-05-19 04:47