FLEX08XL

Unknown · OTHER · by flsun-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

*FLEXXL*

→

*FLEX08XL*

Settings

Flow

Max volumetric speed (mm³/s): 8 overridden
was 3.5 (inherited)

Other settings

compatible printers condition: printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8 overridden
was printer_model=~/.*XL.*/ and nozzle_diameter[0]>=0.3 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 (inherited)
filament deretract speed: 20 inherited
filament minimal purge on wipe tower: 35 inherited
filament multitool ramming: 0 inherited
filament multitool ramming flow: 8 overridden
was 3.5 (inherited)
filament multitool ramming volume: 40 inherited
filament retract before travel: 2 inherited
filament retract speed: 60 inherited
filament travel max lift: 1.5 inherited
filament travel ramping lift: 1 inherited
filament travel slope: 1 inherited
idle temperature: 70 inherited
start filament gcode: M900 K0 ; Filament gcode M142 S36 ; set heatbreak target temp inherited

Raw resolved JSON

{
  "idle_temperature": [
    "70"
  ],
  "start_filament_gcode": [
    "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp"
  ],
  "filament_travel_slope": [
    "1"
  ],
  "filament_retract_speed": [
    "60"
  ],
  "filament_deretract_speed": [
    "20"
  ],
  "filament_travel_max_lift": [
    "1.5"
  ],
  "filament_multitool_ramming": [
    "0"
  ],
  "filament_travel_ramping_lift": [
    "1"
  ],
  "compatible_printers_condition": [
    "printer_model=~/.*XL.*/ and nozzle_diameter[0]==0.8"
  ],
  "filament_max_volumetric_speed": [
    "8"
  ],
  "filament_retract_before_travel": [
    "2"
  ],
  "filament_multitool_ramming_flow": [
    "8"
  ],
  "filament_multitool_ramming_volume": [
    "40"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "35"
  ],
  "name": "*FLEX08XL*",
  "filament_settings_id": [
    "*FLEX08XL*"
  ],
  "type": "filament"
}