AMOLEN wood PLA

AMOLEN · OTHER · by flsun-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

*common_mega*

→

*PLA_mega*

→

AMOLEN wood PLA

Settings

Basic information

Vendor: AMOLEN overridden
was Generic (inherited)
Density (g/cm³): 1.23 overridden
was 1.24 (inherited)
Cost (/kg): 33.99 overridden
was 25.40 (inherited)

Print temperature

Nozzle (initial layer) (°C): 215 inherited
Nozzle (other layers) (°C): 210 inherited

Cooling

Fan minimum (%): 100 inherited
Disable fan for first N layers: 1 inherited
Full fan if layer below (sec): 100 inherited
Slow down if layer below (sec): 20 inherited
Min speed when slowed (mm/s): 15 inherited

Flow

Flow ratio: 1.1 overridden
Max volumetric speed (mm³/s): 9 overridden
was 10 (inherited)

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
High Temp Plate	65 inherited	60 inherited

Other settings

compatible printers condition: nozzle_diameter[0]>0.35 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ overridden
was printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ (inherited)
end filament gcode: ; Filament-specific end gcode inherited
fan always on: 1 inherited
filament colour: #DFC287 overridden
was #FF3232 (inherited)
filament notes: https://amolen.com/collections/wood/products/amolen-pla-filament-1-75mm-wood-color-3d-printer-filament-1kg2-2lb overridden

Raw resolved JSON

{
  "fan_always_on": [
    "1"
  ],
  "filament_vendor": [
    "AMOLEN"
  ],
  "end_filament_gcode": [
    "; Filament-specific end gcode"
  ],
  "slow_down_min_speed": [
    "15"
  ],
  "slow_down_layer_time": [
    "20"
  ],
  "fan_cooling_layer_time": [
    "100"
  ],
  "compatible_printers_condition": [
    "nozzle_diameter[0]>0.35 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/"
  ],
  "fan_min_speed": [
    "100"
  ],
  "filament_cost": [
    "33.99"
  ],
  "hot_plate_temp": [
    "60"
  ],
  "filament_colour": [
    "#DFC287"
  ],
  "filament_density": [
    "1.23"
  ],
  "nozzle_temperature": [
    "210"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "hot_plate_temp_initial_layer": [
    "65"
  ],
  "filament_max_volumetric_speed": [
    "9"
  ],
  "nozzle_temperature_initial_layer": [
    "215"
  ],
  "filament_notes": [
    "https://amolen.com/collections/wood/products/amolen-pla-filament-1-75mm-wood-color-3d-printer-filament-1kg2-2lb"
  ],
  "filament_flow_ratio": [
    "1.1"
  ],
  "name": "AMOLEN wood PLA",
  "filament_settings_id": [
    "AMOLEN wood PLA"
  ],
  "type": "filament"
}