Snapmaker Dual ABS

Generic · ABS · by elegoo-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_abs

→

Snapmaker Dual ABS @base

→

Snapmaker Dual ABS

Compatible printers (18)

Snapmaker A250 Dual (0.4 nozzle)
Snapmaker A250 Dual (0.6 nozzle)
Snapmaker A250 Dual BKit (0.4 nozzle)
Snapmaker A250 Dual BKit (0.6 nozzle)
Snapmaker A250 Dual QS+B Kit (0.4 nozzle)
Snapmaker A250 Dual QS+B Kit (0.6 nozzle)
Snapmaker A250 Dual QSKit (0.4 nozzle)
Snapmaker A250 Dual QSKit (0.6 nozzle)
Snapmaker A350 Dual (0.4 nozzle)
Snapmaker A350 Dual (0.6 nozzle)
Snapmaker A350 Dual BKit (0.4 nozzle)
Snapmaker A350 Dual BKit (0.6 nozzle)
Snapmaker A350 Dual QS+B Kit (0.4 nozzle)
Snapmaker A350 Dual QS+B Kit (0.6 nozzle)
Snapmaker A350 Dual QSKit (0.4 nozzle)
Snapmaker A350 Dual QSKit (0.6 nozzle)
Snapmaker Artisan (0.4 nozzle)
Snapmaker Artisan (0.6 nozzle)

Settings

Basic information

Material variant: ABS inherited
Vendor: Generic inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.24 inherited
Cost (/kg): 30 inherited

Print temperature

Nozzle (initial layer) (°C): 250 inherited
Nozzle (other layers) (°C): 250 inherited

Cooling

Fan minimum (%): 18 inherited
Fan maximum (%): 15 inherited
Disable fan for first N layers: 1 inherited
Full fan if layer below (sec): 5 inherited
Slow down if layer below (sec): 3 inherited
Min speed when slowed (mm/s): 30 inherited

Flow

Flow ratio: 0.95 inherited
Max volumetric speed (mm³/s): 8 inherited

Retraction

Retraction length (mm): nil inherited
Retraction speed (mm/s): nil inherited
Deretraction speed (mm/s): nil inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	105 inherited	105 inherited
Engineering Plate	105 inherited	105 inherited
High Temp Plate	105 inherited	110 inherited
Textured PEI Plate	105 inherited	105 inherited

Other settings

additional cooling fan speed: 0 inherited
bed type: Cool Plate inherited
compatible printers: Snapmaker A250 Dual (0.4 nozzle), Snapmaker A250 Dual (0.6 nozzle), Snapmaker A250 Dual BKit (0.4 nozzle), Snapmaker A250 Dual BKit (0.6 nozzle), Snapmaker A250 Dual QS+B Kit (0.4 nozzle), Snapmaker A250 Dual QS+B Kit (0.6 nozzle), Snapmaker A250 Dual QSKit (0.4 nozzle), Snapmaker A250 Dual QSKit (0.6 nozzle), Snapmaker A350 Dual (0.4 nozzle), Snapmaker A350 Dual (0.6 nozzle), Snapmaker A350 Dual BKit (0.4 nozzle), Snapmaker A350 Dual BKit (0.6 nozzle), Snapmaker A350 Dual QS+B Kit (0.4 nozzle), Snapmaker A350 Dual QS+B Kit (0.6 nozzle), Snapmaker A350 Dual QSKit (0.4 nozzle), Snapmaker A350 Dual QSKit (0.6 nozzle), Snapmaker Artisan (0.4 nozzle), Snapmaker Artisan (0.6 nozzle) overridden
filament cooling final speed: 60 inherited
filament cooling initial speed: 35 inherited
filament cooling moves: 2 inherited
filament id: 168223792 inherited
filament load time: 2 inherited
filament loading speed: 35 inherited
filament loading speed start: 35 inherited
filament minimal purge on wipe tower: 15 inherited
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: nil inherited
filament retraction minimum travel: nil inherited
filament soluble: 0 inherited
filament unload time: 2 inherited
filament unloading speed: 35 inherited
filament unloading speed start: 35 inherited
filament wipe: nil inherited
filament wipe distance: nil inherited
filament z hop: nil inherited
filament z hop types: nil inherited
full fan speed layer: 0 inherited
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 280 inherited
nozzle temperature range low: 240 inherited
overhang fan speed: 20 inherited
overhang fan threshold: 25% inherited
pressure advance: 0.02 inherited
reduce fan stop start freq: 1 inherited
setting id: 937533070 overridden
slow down for layer cooling: 1 inherited
temperature vitrification: 110 inherited

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "15"
  ],
  "fan_min_speed": [
    "18"
  ],
  "filament_cost": [
    "30"
  ],
  "filament_type": [
    "ABS"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "105"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "110"
  ],
  "cool_plate_temp": [
    "105"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.24"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "250"
  ],
  "overhang_fan_speed": [
    "20"
  ],
  "filament_flow_ratio": [
    "0.95"
  ],
  "slow_down_min_speed": [
    "30"
  ],
  "textured_plate_temp": [
    "105"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; filament start gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "3"
  ],
  "fan_cooling_layer_time": [
    "5"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "110"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "eng_plate_temp_initial_layer": [
    "105"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "105"
  ],
  "cool_plate_temp_initial_layer": [
    "105"
  ],
  "filament_max_volumetric_speed": [
    "8"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "250"
  ],
  "textured_plate_temp_initial_layer": [
    "105"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "additional_cooling_fan_speed": [
    "0"
  ],
  "nozzle_temperature_range_low": [
    "240"
  ],
  "nozzle_temperature_range_high": [
    "280"
  ],
  "filament_id": "168223792",
  "pressure_advance": [
    "0.02"
  ],
  "filament_load_time": [
    "2"
  ],
  "filament_unload_time": [
    "2"
  ],
  "filament_cooling_moves": [
    "2"
  ],
  "filament_loading_speed": [
    "35"
  ],
  "filament_unloading_speed": [
    "35"
  ],
  "filament_cooling_final_speed": [
    "60"
  ],
  "filament_loading_speed_start": [
    "35"
  ],
  "filament_cooling_initial_speed": [
    "35"
  ],
  "filament_unloading_speed_start": [
    "35"
  ],
  "setting_id": "937533070",
  "compatible_printers": [
    "Snapmaker A250 Dual (0.4 nozzle)",
    "Snapmaker A250 Dual (0.6 nozzle)",
    "Snapmaker A250 Dual BKit (0.4 nozzle)",
    "Snapmaker A250 Dual BKit (0.6 nozzle)",
    "Snapmaker A250 Dual QS+B Kit (0.4 nozzle)",
    "Snapmaker A250 Dual QS+B Kit (0.6 nozzle)",
    "Snapmaker A250 Dual QSKit (0.4 nozzle)",
    "Snapmaker A250 Dual QSKit (0.6 nozzle)",
    "Snapmaker A350 Dual (0.4 nozzle)",
    "Snapmaker A350 Dual (0.6 nozzle)",
    "Snapmaker A350 Dual BKit (0.4 nozzle)",
    "Snapmaker A350 Dual BKit (0.6 nozzle)",
    "Snapmaker A350 Dual QS+B Kit (0.4 nozzle)",
    "Snapmaker A350 Dual QS+B Kit (0.6 nozzle)",
    "Snapmaker A350 Dual QSKit (0.4 nozzle)",
    "Snapmaker A350 Dual QSKit (0.6 nozzle)",
    "Snapmaker Artisan (0.4 nozzle)",
    "Snapmaker Artisan (0.6 nozzle)"
  ],
  "name": "Snapmaker Dual ABS"
}

Version history

View full history with diffs →

v1 created 2026-05-19 12:42