Generic ASA @Elegoo

Generic · ASA · by elegoo-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_asa

→

Generic ASA @base

→

Generic ASA @Elegoo

Compatible printers (50)

Elegoo Neptune 0.4 nozzle
Elegoo Neptune 0.6 nozzle
Elegoo Neptune 0.8 nozzle
Elegoo Neptune 2 0.4 nozzle
Elegoo Neptune 2 0.6 nozzle
Elegoo Neptune 2 0.8 nozzle
Elegoo Neptune 2D 0.4 nozzle
Elegoo Neptune 2D 0.6 nozzle
Elegoo Neptune 2D 0.8 nozzle
Elegoo Neptune 2S 0.4 nozzle
Elegoo Neptune 2S 0.6 nozzle
Elegoo Neptune 2S 0.8 nozzle
Elegoo Neptune 3 0.4 nozzle
Elegoo Neptune 3 0.6 nozzle
Elegoo Neptune 3 0.8 nozzle
Elegoo Neptune 3 Max 0.4 nozzle
Elegoo Neptune 3 Max 0.6 nozzle
Elegoo Neptune 3 Max 0.8 nozzle
Elegoo Neptune 3 Max 1.0 nozzle
Elegoo Neptune 3 Plus 0.4 nozzle
Elegoo Neptune 3 Plus 0.6 nozzle
Elegoo Neptune 3 Plus 0.8 nozzle
Elegoo Neptune 3 Plus 1.0 nozzle
Elegoo Neptune 3 Pro 0.4 nozzle
Elegoo Neptune 3 Pro 0.6 nozzle
Elegoo Neptune 3 Pro 0.8 nozzle
Elegoo Neptune 3 Pro 1.0 nozzle
Elegoo Neptune 4 (0.2 nozzle)
Elegoo Neptune 4 0.4 nozzle
Elegoo Neptune 4 (0.6 nozzle)
Elegoo Neptune 4 (0.8 nozzle)
Elegoo Neptune 4 1.0 nozzle
Elegoo Neptune 4 Max (0.2 nozzle)
Elegoo Neptune 4 Max 0.4 nozzle
Elegoo Neptune 4 Max (0.6 nozzle)
Elegoo Neptune 4 Max (0.8 nozzle)
Elegoo Neptune 4 Max 1.0 nozzle
Elegoo Neptune 4 Plus (0.2 nozzle)
Elegoo Neptune 4 Plus 0.4 nozzle
Elegoo Neptune 4 Plus (0.6 nozzle)
Elegoo Neptune 4 Plus (0.8 nozzle)
Elegoo Neptune 4 Plus 1.0 nozzle
Elegoo Neptune 4 Pro (0.2 nozzle)
Elegoo Neptune 4 Pro 0.4 nozzle
Elegoo Neptune 4 Pro (0.6 nozzle)
Elegoo Neptune 4 Pro (0.8 nozzle)
Elegoo Neptune 4 Pro 1.0 nozzle
Elegoo Neptune X 0.4 nozzle
Elegoo Neptune X 0.6 nozzle
Elegoo Neptune X 0.8 nozzle

Settings

Basic information

Material variant: ASA overridden
was ASA (inherited)
Vendor: Generic inherited
Diameter (mm): 1.75 overridden
was 1.75 (inherited)
Density (g/cm³): 1.1 overridden
was 1.24 (inherited)
Cost (/kg): 0 overridden
was 30 (inherited)

Print temperature

Nozzle (initial layer) (°C): 260 overridden
was 260 (inherited)
Nozzle (other layers) (°C): 260 overridden
was 250 (inherited)

Cooling

Fan minimum (%): 10 overridden
was 10 (inherited)
Fan maximum (%): 80 overridden
was 60 (inherited)
Disable fan for first N layers: 3 overridden
was 1 (inherited)
Full fan if layer below (sec): 35 overridden
was 35 (inherited)
Slow down if layer below (sec): 3 overridden
was 3 (inherited)
Min speed when slowed (mm/s): 20 overridden
was 30 (inherited)

Flow

Flow ratio: 1 overridden
was 0.95 (inherited)
Max volumetric speed (mm³/s): 12 overridden
was 12 (inherited)

Retraction

Retraction length (mm): nil overridden
was nil (inherited)
Retraction speed (mm/s): nil overridden
was nil (inherited)
Deretraction speed (mm/s): nil overridden
was nil (inherited)

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	0 overridden was 105	0 overridden was 105
Engineering Plate	90 overridden was 100	90 overridden was 100
High Temp Plate	90 overridden was 100	90 overridden was 100
Textured PEI Plate	90 overridden was 100	90 overridden was 100

Other settings

activate air filtration: 1 overridden
additional cooling fan speed: 0 inherited
bed type: Cool Plate overridden
was Cool Plate (inherited)
compatible printers: Elegoo Neptune 0.4 nozzle, Elegoo Neptune 0.6 nozzle, Elegoo Neptune 0.8 nozzle, Elegoo Neptune 2 0.4 nozzle, Elegoo Neptune 2 0.6 nozzle, Elegoo Neptune 2 0.8 nozzle, Elegoo Neptune 2S 0.4 nozzle, Elegoo Neptune 2S 0.6 nozzle, Elegoo Neptune 2S 0.8 nozzle, Elegoo Neptune 2D 0.4 nozzle, Elegoo Neptune 2D 0.6 nozzle, Elegoo Neptune 2D 0.8 nozzle, Elegoo Neptune X 0.4 nozzle, Elegoo Neptune X 0.6 nozzle, Elegoo Neptune X 0.8 nozzle, Elegoo Neptune 3 0.4 nozzle, Elegoo Neptune 3 0.6 nozzle, Elegoo Neptune 3 0.8 nozzle, Elegoo Neptune 3 Pro 0.4 nozzle, Elegoo Neptune 3 Pro 0.6 nozzle, Elegoo Neptune 3 Pro 0.8 nozzle, Elegoo Neptune 3 Pro 1.0 nozzle, Elegoo Neptune 3 Plus 0.4 nozzle, Elegoo Neptune 3 Plus 0.6 nozzle, Elegoo Neptune 3 Plus 0.8 nozzle, Elegoo Neptune 3 Plus 1.0 nozzle, Elegoo Neptune 3 Max 0.4 nozzle, Elegoo Neptune 3 Max 0.6 nozzle, Elegoo Neptune 3 Max 0.8 nozzle, Elegoo Neptune 3 Max 1.0 nozzle, Elegoo Neptune 4 0.2 nozzle, Elegoo Neptune 4 0.4 nozzle, Elegoo Neptune 4 0.6 nozzle, Elegoo Neptune 4 0.8 nozzle, Elegoo Neptune 4 1.0 nozzle, Elegoo Neptune 4 Max 0.2 nozzle, Elegoo Neptune 4 Pro 0.4 nozzle, Elegoo Neptune 4 Pro 0.6 nozzle, Elegoo Neptune 4 Pro 0.8 nozzle, Elegoo Neptune 4 Pro 1.0 nozzle, Elegoo Neptune 4 Plus 0.2 nozzle, Elegoo Neptune 4 Plus 0.4 nozzle, Elegoo Neptune 4 Plus 0.6 nozzle, Elegoo Neptune 4 Plus 0.8 nozzle, Elegoo Neptune 4 Plus 1.0 nozzle, Elegoo Neptune 4 Pro 0.2 nozzle, Elegoo Neptune 4 Max 0.4 nozzle, Elegoo Neptune 4 Max 0.6 nozzle, Elegoo Neptune 4 Max 0.8 nozzle, Elegoo Neptune 4 Max 1.0 nozzle overridden
description: When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials. inherited
filament id: GFB98 inherited
filament minimal purge on wipe tower: 15 overridden
was 15 (inherited)
filament retract before wipe: nil overridden
was nil (inherited)
filament retract restart extra: nil overridden
was nil (inherited)
filament retract when changing layer: nil overridden
was nil (inherited)
filament retraction minimum travel: nil overridden
was nil (inherited)
filament soluble: 0 overridden
was 0 (inherited)
filament wipe: nil overridden
was nil (inherited)
filament wipe distance: nil overridden
was nil (inherited)
filament z hop: nil overridden
was nil (inherited)
filament z hop types: nil overridden
was nil (inherited)
full fan speed layer: 0 overridden
was 0 (inherited)
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 280 overridden
was 270 (inherited)
nozzle temperature range low: 240 overridden
was 240 (inherited)
overhang fan speed: 80 overridden
was 80 (inherited)
overhang fan threshold: 25% overridden
was 25% (inherited)
reduce fan stop start freq: 1 overridden
was 1 (inherited)
setting id: GFSA04 overridden
slow down for layer cooling: 1 overridden
was 1 (inherited)
temperature vitrification: 100 overridden
was 110 (inherited)

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "80"
  ],
  "fan_min_speed": [
    "10"
  ],
  "filament_cost": [
    "0"
  ],
  "filament_type": [
    "ASA"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "90"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "90"
  ],
  "cool_plate_temp": [
    "0"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.1"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "260"
  ],
  "overhang_fan_speed": [
    "80"
  ],
  "filament_flow_ratio": [
    "1"
  ],
  "slow_down_min_speed": [
    "20"
  ],
  "textured_plate_temp": [
    "90"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; Filament gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "3"
  ],
  "fan_cooling_layer_time": [
    "35"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "100"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "eng_plate_temp_initial_layer": [
    "90"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "90"
  ],
  "cool_plate_temp_initial_layer": [
    "0"
  ],
  "filament_max_volumetric_speed": [
    "12"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "260"
  ],
  "textured_plate_temp_initial_layer": [
    "90"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "additional_cooling_fan_speed": [
    "0"
  ],
  "nozzle_temperature_range_low": [
    "240"
  ],
  "nozzle_temperature_range_high": [
    "280"
  ],
  "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
  "filament_id": "GFB98",
  "setting_id": "GFSA04",
  "compatible_printers": [
    "Elegoo Neptune 0.4 nozzle",
    "Elegoo Neptune 0.6 nozzle",
    "Elegoo Neptune 0.8 nozzle",
    "Elegoo Neptune 2 0.4 nozzle",
    "Elegoo Neptune 2 0.6 nozzle",
    "Elegoo Neptune 2 0.8 nozzle",
    "Elegoo Neptune 2S 0.4 nozzle",
    "Elegoo Neptune 2S 0.6 nozzle",
    "Elegoo Neptune 2S 0.8 nozzle",
    "Elegoo Neptune 2D 0.4 nozzle",
    "Elegoo Neptune 2D 0.6 nozzle",
    "Elegoo Neptune 2D 0.8 nozzle",
    "Elegoo Neptune X 0.4 nozzle",
    "Elegoo Neptune X 0.6 nozzle",
    "Elegoo Neptune X 0.8 nozzle",
    "Elegoo Neptune 3 0.4 nozzle",
    "Elegoo Neptune 3 0.6 nozzle",
    "Elegoo Neptune 3 0.8 nozzle",
    "Elegoo Neptune 3 Pro 0.4 nozzle",
    "Elegoo Neptune 3 Pro 0.6 nozzle",
    "Elegoo Neptune 3 Pro 0.8 nozzle",
    "Elegoo Neptune 3 Pro 1.0 nozzle",
    "Elegoo Neptune 3 Plus 0.4 nozzle",
    "Elegoo Neptune 3 Plus 0.6 nozzle",
    "Elegoo Neptune 3 Plus 0.8 nozzle",
    "Elegoo Neptune 3 Plus 1.0 nozzle",
    "Elegoo Neptune 3 Max 0.4 nozzle",
    "Elegoo Neptune 3 Max 0.6 nozzle",
    "Elegoo Neptune 3 Max 0.8 nozzle",
    "Elegoo Neptune 3 Max 1.0 nozzle",
    "Elegoo Neptune 4 0.2 nozzle",
    "Elegoo Neptune 4 0.4 nozzle",
    "Elegoo Neptune 4 0.6 nozzle",
    "Elegoo Neptune 4 0.8 nozzle",
    "Elegoo Neptune 4 1.0 nozzle",
    "Elegoo Neptune 4 Max 0.2 nozzle",
    "Elegoo Neptune 4 Pro 0.4 nozzle",
    "Elegoo Neptune 4 Pro 0.6 nozzle",
    "Elegoo Neptune 4 Pro 0.8 nozzle",
    "Elegoo Neptune 4 Pro 1.0 nozzle",
    "Elegoo Neptune 4 Plus 0.2 nozzle",
    "Elegoo Neptune 4 Plus 0.4 nozzle",
    "Elegoo Neptune 4 Plus 0.6 nozzle",
    "Elegoo Neptune 4 Plus 0.8 nozzle",
    "Elegoo Neptune 4 Plus 1.0 nozzle",
    "Elegoo Neptune 4 Pro 0.2 nozzle",
    "Elegoo Neptune 4 Max 0.4 nozzle",
    "Elegoo Neptune 4 Max 0.6 nozzle",
    "Elegoo Neptune 4 Max 0.8 nozzle",
    "Elegoo Neptune 4 Max 1.0 nozzle"
  ],
  "activate_air_filtration": [
    "1"
  ],
  "name": "Generic ASA @Elegoo"
}

Version history

View full history with diffs →

v1 created 2026-05-19 12:37