Generic PLA Matte @Elegoo

Generic · PLA · by elegoo-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_pla

→

Generic PLA @base

→

Generic PLA Matte @Elegoo

Compatible printers (50)

Elegoo Neptune 0.4 nozzle
Elegoo Neptune 0.6 nozzle
Elegoo Neptune 0.8 nozzle
Elegoo Neptune 2 0.4 nozzle
Elegoo Neptune 2 0.6 nozzle
Elegoo Neptune 2 0.8 nozzle
Elegoo Neptune 2D 0.4 nozzle
Elegoo Neptune 2D 0.6 nozzle
Elegoo Neptune 2D 0.8 nozzle
Elegoo Neptune 2S 0.4 nozzle
Elegoo Neptune 2S 0.6 nozzle
Elegoo Neptune 2S 0.8 nozzle
Elegoo Neptune 3 0.4 nozzle
Elegoo Neptune 3 0.6 nozzle
Elegoo Neptune 3 0.8 nozzle
Elegoo Neptune 3 Max 0.4 nozzle
Elegoo Neptune 3 Max 0.6 nozzle
Elegoo Neptune 3 Max 0.8 nozzle
Elegoo Neptune 3 Max 1.0 nozzle
Elegoo Neptune 3 Plus 0.4 nozzle
Elegoo Neptune 3 Plus 0.6 nozzle
Elegoo Neptune 3 Plus 0.8 nozzle
Elegoo Neptune 3 Plus 1.0 nozzle
Elegoo Neptune 3 Pro 0.4 nozzle
Elegoo Neptune 3 Pro 0.6 nozzle
Elegoo Neptune 3 Pro 0.8 nozzle
Elegoo Neptune 3 Pro 1.0 nozzle
Elegoo Neptune 4 (0.2 nozzle)
Elegoo Neptune 4 0.4 nozzle
Elegoo Neptune 4 (0.6 nozzle)
Elegoo Neptune 4 (0.8 nozzle)
Elegoo Neptune 4 1.0 nozzle
Elegoo Neptune 4 Max (0.2 nozzle)
Elegoo Neptune 4 Max 0.4 nozzle
Elegoo Neptune 4 Max (0.6 nozzle)
Elegoo Neptune 4 Max (0.8 nozzle)
Elegoo Neptune 4 Max 1.0 nozzle
Elegoo Neptune 4 Plus (0.2 nozzle)
Elegoo Neptune 4 Plus 0.4 nozzle
Elegoo Neptune 4 Plus (0.6 nozzle)
Elegoo Neptune 4 Plus (0.8 nozzle)
Elegoo Neptune 4 Plus 1.0 nozzle
Elegoo Neptune 4 Pro (0.2 nozzle)
Elegoo Neptune 4 Pro 0.4 nozzle
Elegoo Neptune 4 Pro (0.6 nozzle)
Elegoo Neptune 4 Pro (0.8 nozzle)
Elegoo Neptune 4 Pro 1.0 nozzle
Elegoo Neptune X 0.4 nozzle
Elegoo Neptune X 0.6 nozzle
Elegoo Neptune X 0.8 nozzle

Settings

Basic information

Material variant: PLA overridden
was PLA (inherited)
Vendor: Generic inherited
Diameter (mm): 1.75 overridden
was 1.75 (inherited)
Density (g/cm³): 1.25 overridden
was 1.24 (inherited)
Cost (/kg): 0 overridden
was 30 (inherited)

Print temperature

Nozzle (initial layer) (°C): 215 overridden
was 220 (inherited)
Nozzle (other layers) (°C): 215 overridden
was 220 (inherited)

Cooling

Fan minimum (%): 100 overridden
was 100 (inherited)
Fan maximum (%): 100 overridden
was 100 (inherited)
Disable fan for first N layers: 1 overridden
was 1 (inherited)
Full fan if layer below (sec): 100 overridden
was 100 (inherited)
Slow down if layer below (sec): 4 overridden
was 8 (inherited)
Min speed when slowed (mm/s): 10 overridden
was 5 (inherited)

Flow

Flow ratio: 1 overridden
was 0.98 (inherited)
Max volumetric speed (mm³/s): 15 overridden
was 20 (inherited)

Retraction

Retraction length (mm): nil overridden
was nil (inherited)
Retraction speed (mm/s): nil overridden
was nil (inherited)
Deretraction speed (mm/s): nil overridden
was nil (inherited)

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	60 overridden was 50	60 overridden was 50
Engineering Plate	60 overridden was 50	60 overridden was 50
High Temp Plate	60 overridden was 50	60 overridden was 50
Textured PEI Plate	60 overridden was 50	60 overridden was 50

Other settings

additional cooling fan speed: 70 overridden
was 0 (inherited)
bed type: Cool Plate overridden
was Cool Plate (inherited)
compatible printers: Elegoo Neptune 0.4 nozzle, Elegoo Neptune 0.6 nozzle, Elegoo Neptune 0.8 nozzle, Elegoo Neptune 2 0.4 nozzle, Elegoo Neptune 2 0.6 nozzle, Elegoo Neptune 2 0.8 nozzle, Elegoo Neptune 2S 0.4 nozzle, Elegoo Neptune 2S 0.6 nozzle, Elegoo Neptune 2S 0.8 nozzle, Elegoo Neptune 2D 0.4 nozzle, Elegoo Neptune 2D 0.6 nozzle, Elegoo Neptune 2D 0.8 nozzle, Elegoo Neptune X 0.4 nozzle, Elegoo Neptune X 0.6 nozzle, Elegoo Neptune X 0.8 nozzle, Elegoo Neptune 3 0.4 nozzle, Elegoo Neptune 3 0.6 nozzle, Elegoo Neptune 3 0.8 nozzle, Elegoo Neptune 3 Pro 0.4 nozzle, Elegoo Neptune 3 Pro 0.6 nozzle, Elegoo Neptune 3 Pro 0.8 nozzle, Elegoo Neptune 3 Pro 1.0 nozzle, Elegoo Neptune 3 Plus 0.4 nozzle, Elegoo Neptune 3 Plus 0.6 nozzle, Elegoo Neptune 3 Plus 0.8 nozzle, Elegoo Neptune 3 Plus 1.0 nozzle, Elegoo Neptune 3 Max 0.4 nozzle, Elegoo Neptune 3 Max 0.6 nozzle, Elegoo Neptune 3 Max 0.8 nozzle, Elegoo Neptune 3 Max 1.0 nozzle, Elegoo Neptune 4 0.2 nozzle, Elegoo Neptune 4 0.4 nozzle, Elegoo Neptune 4 0.6 nozzle, Elegoo Neptune 4 0.8 nozzle, Elegoo Neptune 4 1.0 nozzle, Elegoo Neptune 4 Max 0.2 nozzle, Elegoo Neptune 4 Pro 0.4 nozzle, Elegoo Neptune 4 Pro 0.6 nozzle, Elegoo Neptune 4 Pro 0.8 nozzle, Elegoo Neptune 4 Pro 1.0 nozzle, Elegoo Neptune 4 Plus 0.2 nozzle, Elegoo Neptune 4 Plus 0.4 nozzle, Elegoo Neptune 4 Plus 0.6 nozzle, Elegoo Neptune 4 Plus 0.8 nozzle, Elegoo Neptune 4 Plus 1.0 nozzle, Elegoo Neptune 4 Pro 0.2 nozzle, Elegoo Neptune 4 Max 0.4 nozzle, Elegoo Neptune 4 Max 0.6 nozzle, Elegoo Neptune 4 Max 0.8 nozzle, Elegoo Neptune 4 Max 1.0 nozzle overridden
description: The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets. inherited
filament id: GFL99 inherited
filament minimal purge on wipe tower: 15 overridden
was 15 (inherited)
filament retract before wipe: nil overridden
was nil (inherited)
filament retract restart extra: nil overridden
was nil (inherited)
filament retract when changing layer: nil overridden
was nil (inherited)
filament retraction minimum travel: nil overridden
was nil (inherited)
filament soluble: 0 overridden
was 0 (inherited)
filament wipe: nil overridden
was nil (inherited)
filament wipe distance: nil overridden
was nil (inherited)
filament z hop: nil overridden
was nil (inherited)
filament z hop types: nil overridden
was nil (inherited)
full fan speed layer: 0 overridden
was 0 (inherited)
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 215 overridden
was 230 (inherited)
nozzle temperature range low: 205 overridden
was 190 (inherited)
overhang fan speed: 100 overridden
was 100 (inherited)
overhang fan threshold: 50% overridden
was 50% (inherited)
reduce fan stop start freq: 1 overridden
was 1 (inherited)
setting id: GFSL99 overridden
slow down for layer cooling: 1 overridden
was 1 (inherited)
temperature vitrification: 60 overridden
was 60 (inherited)

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "100"
  ],
  "fan_min_speed": [
    "100"
  ],
  "filament_cost": [
    "0"
  ],
  "filament_type": [
    "PLA"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "60"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "60"
  ],
  "cool_plate_temp": [
    "60"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.25"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "215"
  ],
  "overhang_fan_speed": [
    "100"
  ],
  "filament_flow_ratio": [
    "1"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "textured_plate_temp": [
    "60"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; filament start gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "4"
  ],
  "fan_cooling_layer_time": [
    "100"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "50%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "60"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "eng_plate_temp_initial_layer": [
    "60"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "60"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "filament_max_volumetric_speed": [
    "15"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "215"
  ],
  "textured_plate_temp_initial_layer": [
    "60"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "additional_cooling_fan_speed": [
    "70"
  ],
  "nozzle_temperature_range_low": [
    "205"
  ],
  "nozzle_temperature_range_high": [
    "215"
  ],
  "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.",
  "filament_id": "GFL99",
  "setting_id": "GFSL99",
  "compatible_printers": [
    "Elegoo Neptune 0.4 nozzle",
    "Elegoo Neptune 0.6 nozzle",
    "Elegoo Neptune 0.8 nozzle",
    "Elegoo Neptune 2 0.4 nozzle",
    "Elegoo Neptune 2 0.6 nozzle",
    "Elegoo Neptune 2 0.8 nozzle",
    "Elegoo Neptune 2S 0.4 nozzle",
    "Elegoo Neptune 2S 0.6 nozzle",
    "Elegoo Neptune 2S 0.8 nozzle",
    "Elegoo Neptune 2D 0.4 nozzle",
    "Elegoo Neptune 2D 0.6 nozzle",
    "Elegoo Neptune 2D 0.8 nozzle",
    "Elegoo Neptune X 0.4 nozzle",
    "Elegoo Neptune X 0.6 nozzle",
    "Elegoo Neptune X 0.8 nozzle",
    "Elegoo Neptune 3 0.4 nozzle",
    "Elegoo Neptune 3 0.6 nozzle",
    "Elegoo Neptune 3 0.8 nozzle",
    "Elegoo Neptune 3 Pro 0.4 nozzle",
    "Elegoo Neptune 3 Pro 0.6 nozzle",
    "Elegoo Neptune 3 Pro 0.8 nozzle",
    "Elegoo Neptune 3 Pro 1.0 nozzle",
    "Elegoo Neptune 3 Plus 0.4 nozzle",
    "Elegoo Neptune 3 Plus 0.6 nozzle",
    "Elegoo Neptune 3 Plus 0.8 nozzle",
    "Elegoo Neptune 3 Plus 1.0 nozzle",
    "Elegoo Neptune 3 Max 0.4 nozzle",
    "Elegoo Neptune 3 Max 0.6 nozzle",
    "Elegoo Neptune 3 Max 0.8 nozzle",
    "Elegoo Neptune 3 Max 1.0 nozzle",
    "Elegoo Neptune 4 0.2 nozzle",
    "Elegoo Neptune 4 0.4 nozzle",
    "Elegoo Neptune 4 0.6 nozzle",
    "Elegoo Neptune 4 0.8 nozzle",
    "Elegoo Neptune 4 1.0 nozzle",
    "Elegoo Neptune 4 Max 0.2 nozzle",
    "Elegoo Neptune 4 Pro 0.4 nozzle",
    "Elegoo Neptune 4 Pro 0.6 nozzle",
    "Elegoo Neptune 4 Pro 0.8 nozzle",
    "Elegoo Neptune 4 Pro 1.0 nozzle",
    "Elegoo Neptune 4 Plus 0.2 nozzle",
    "Elegoo Neptune 4 Plus 0.4 nozzle",
    "Elegoo Neptune 4 Plus 0.6 nozzle",
    "Elegoo Neptune 4 Plus 0.8 nozzle",
    "Elegoo Neptune 4 Plus 1.0 nozzle",
    "Elegoo Neptune 4 Pro 0.2 nozzle",
    "Elegoo Neptune 4 Max 0.4 nozzle",
    "Elegoo Neptune 4 Max 0.6 nozzle",
    "Elegoo Neptune 4 Max 0.8 nozzle",
    "Elegoo Neptune 4 Max 1.0 nozzle"
  ],
  "name": "Generic PLA Matte @Elegoo"
}

Version history

View full history with diffs →

v1 created 2026-05-19 12:37