Generic PETG @Elegoo

Generic · PETG · by elegoo-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_pet

→

Generic PETG @base

→

Generic PETG @Elegoo

Compatible printers (50)

Elegoo Neptune 0.4 nozzle
Elegoo Neptune 0.6 nozzle
Elegoo Neptune 0.8 nozzle
Elegoo Neptune 2 0.4 nozzle
Elegoo Neptune 2 0.6 nozzle
Elegoo Neptune 2 0.8 nozzle
Elegoo Neptune 2D 0.4 nozzle
Elegoo Neptune 2D 0.6 nozzle
Elegoo Neptune 2D 0.8 nozzle
Elegoo Neptune 2S 0.4 nozzle
Elegoo Neptune 2S 0.6 nozzle
Elegoo Neptune 2S 0.8 nozzle
Elegoo Neptune 3 0.4 nozzle
Elegoo Neptune 3 0.6 nozzle
Elegoo Neptune 3 0.8 nozzle
Elegoo Neptune 3 Max 0.4 nozzle
Elegoo Neptune 3 Max 0.6 nozzle
Elegoo Neptune 3 Max 0.8 nozzle
Elegoo Neptune 3 Max 1.0 nozzle
Elegoo Neptune 3 Plus 0.4 nozzle
Elegoo Neptune 3 Plus 0.6 nozzle
Elegoo Neptune 3 Plus 0.8 nozzle
Elegoo Neptune 3 Plus 1.0 nozzle
Elegoo Neptune 3 Pro 0.4 nozzle
Elegoo Neptune 3 Pro 0.6 nozzle
Elegoo Neptune 3 Pro 0.8 nozzle
Elegoo Neptune 3 Pro 1.0 nozzle
Elegoo Neptune 4 (0.2 nozzle)
Elegoo Neptune 4 0.4 nozzle
Elegoo Neptune 4 (0.6 nozzle)
Elegoo Neptune 4 (0.8 nozzle)
Elegoo Neptune 4 1.0 nozzle
Elegoo Neptune 4 Max (0.2 nozzle)
Elegoo Neptune 4 Max 0.4 nozzle
Elegoo Neptune 4 Max (0.6 nozzle)
Elegoo Neptune 4 Max (0.8 nozzle)
Elegoo Neptune 4 Max 1.0 nozzle
Elegoo Neptune 4 Plus (0.2 nozzle)
Elegoo Neptune 4 Plus 0.4 nozzle
Elegoo Neptune 4 Plus (0.6 nozzle)
Elegoo Neptune 4 Plus (0.8 nozzle)
Elegoo Neptune 4 Plus 1.0 nozzle
Elegoo Neptune 4 Pro (0.2 nozzle)
Elegoo Neptune 4 Pro 0.4 nozzle
Elegoo Neptune 4 Pro (0.6 nozzle)
Elegoo Neptune 4 Pro (0.8 nozzle)
Elegoo Neptune 4 Pro 1.0 nozzle
Elegoo Neptune X 0.4 nozzle
Elegoo Neptune X 0.6 nozzle
Elegoo Neptune X 0.8 nozzle

Settings

Basic information

Material variant: PETG overridden
was PETG (inherited)
Vendor: Generic overridden
was Generic (inherited)
Diameter (mm): 1.75 overridden
was 1.75 (inherited)
Density (g/cm³): 1.27 overridden
was 1.27 (inherited)
Cost (/kg): 0 overridden
was 30 (inherited)

Print temperature

Nozzle (initial layer) (°C): 240 overridden
was 255 (inherited)
Nozzle (other layers) (°C): 240 overridden
was 255 (inherited)

Cooling

Fan minimum (%): 20 overridden
was 40 (inherited)
Fan maximum (%): 50 overridden
was 90 (inherited)
Disable fan for first N layers: 3 overridden
was 3 (inherited)
Full fan if layer below (sec): 30 overridden
was 30 (inherited)
Slow down if layer below (sec): 8 overridden
was 12 (inherited)
Min speed when slowed (mm/s): 10 overridden
was 20 (inherited)

Flow

Flow ratio: 0.95 overridden
was 0.95 (inherited)
Max volumetric speed (mm³/s): 10 overridden
was 12 (inherited)

Retraction

Retraction length (mm): nil overridden
was nil (inherited)
Retraction speed (mm/s): nil overridden
was nil (inherited)
Deretraction speed (mm/s): nil overridden
was nil (inherited)

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	60 overridden was 0	60 overridden was 0
Engineering Plate	0 overridden was 70	0 overridden was 70
High Temp Plate	80 overridden was 70	80 overridden was 70
Textured PEI Plate	80 overridden was 70	80 overridden was 70

Other settings

bed type: Cool Plate overridden
was Cool Plate (inherited)
compatible printers: Elegoo Neptune 0.4 nozzle, Elegoo Neptune 0.6 nozzle, Elegoo Neptune 0.8 nozzle, Elegoo Neptune 2 0.4 nozzle, Elegoo Neptune 2 0.6 nozzle, Elegoo Neptune 2 0.8 nozzle, Elegoo Neptune 2S 0.4 nozzle, Elegoo Neptune 2S 0.6 nozzle, Elegoo Neptune 2S 0.8 nozzle, Elegoo Neptune 2D 0.4 nozzle, Elegoo Neptune 2D 0.6 nozzle, Elegoo Neptune 2D 0.8 nozzle, Elegoo Neptune X 0.4 nozzle, Elegoo Neptune X 0.6 nozzle, Elegoo Neptune X 0.8 nozzle, Elegoo Neptune 3 0.4 nozzle, Elegoo Neptune 3 0.6 nozzle, Elegoo Neptune 3 0.8 nozzle, Elegoo Neptune 3 Pro 0.4 nozzle, Elegoo Neptune 3 Pro 0.6 nozzle, Elegoo Neptune 3 Pro 0.8 nozzle, Elegoo Neptune 3 Pro 1.0 nozzle, Elegoo Neptune 3 Plus 0.4 nozzle, Elegoo Neptune 3 Plus 0.6 nozzle, Elegoo Neptune 3 Plus 0.8 nozzle, Elegoo Neptune 3 Plus 1.0 nozzle, Elegoo Neptune 3 Max 0.4 nozzle, Elegoo Neptune 3 Max 0.6 nozzle, Elegoo Neptune 3 Max 0.8 nozzle, Elegoo Neptune 3 Max 1.0 nozzle, Elegoo Neptune 4 0.2 nozzle, Elegoo Neptune 4 0.4 nozzle, Elegoo Neptune 4 0.6 nozzle, Elegoo Neptune 4 0.8 nozzle, Elegoo Neptune 4 1.0 nozzle, Elegoo Neptune 4 Max 0.2 nozzle, Elegoo Neptune 4 Pro 0.4 nozzle, Elegoo Neptune 4 Pro 0.6 nozzle, Elegoo Neptune 4 Pro 0.8 nozzle, Elegoo Neptune 4 Pro 1.0 nozzle, Elegoo Neptune 4 Plus 0.2 nozzle, Elegoo Neptune 4 Plus 0.4 nozzle, Elegoo Neptune 4 Plus 0.6 nozzle, Elegoo Neptune 4 Plus 0.8 nozzle, Elegoo Neptune 4 Plus 1.0 nozzle, Elegoo Neptune 4 Pro 0.2 nozzle, Elegoo Neptune 4 Max 0.4 nozzle, Elegoo Neptune 4 Max 0.6 nozzle, Elegoo Neptune 4 Max 0.8 nozzle, Elegoo Neptune 4 Max 1.0 nozzle overridden
filament id: GFG99 inherited
filament minimal purge on wipe tower: 15 overridden
was 15 (inherited)
filament retract before wipe: nil overridden
was nil (inherited)
filament retract restart extra: nil overridden
was nil (inherited)
filament retract when changing layer: nil overridden
was nil (inherited)
filament retraction minimum travel: nil overridden
was nil (inherited)
filament soluble: 0 overridden
was 0 (inherited)
filament wipe: nil overridden
was nil (inherited)
filament wipe distance: nil overridden
was nil (inherited)
filament z hop: nil overridden
was nil (inherited)
filament z hop types: nil overridden
was nil (inherited)
full fan speed layer: 0 overridden
was 0 (inherited)
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 260 overridden
was 270 (inherited)
nozzle temperature range low: 220 overridden
was 220 (inherited)
overhang fan speed: 90 overridden
was 90 (inherited)
overhang fan threshold: 25% overridden
was 10% (inherited)
reduce fan stop start freq: 1 overridden
was 1 (inherited)
setting id: GFSG99 overridden
slow down for layer cooling: 1 overridden
was 1 (inherited)
temperature vitrification: 70 overridden
was 80 (inherited)

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "50"
  ],
  "fan_min_speed": [
    "20"
  ],
  "filament_cost": [
    "0"
  ],
  "filament_type": [
    "PETG"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "0"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "80"
  ],
  "cool_plate_temp": [
    "60"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.27"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "240"
  ],
  "overhang_fan_speed": [
    "90"
  ],
  "filament_flow_ratio": [
    "0.95"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "textured_plate_temp": [
    "80"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; filament start gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "25%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "70"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "eng_plate_temp_initial_layer": [
    "0"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "80"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "filament_max_volumetric_speed": [
    "10"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "240"
  ],
  "textured_plate_temp_initial_layer": [
    "80"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "nozzle_temperature_range_low": [
    "220"
  ],
  "nozzle_temperature_range_high": [
    "260"
  ],
  "filament_id": "GFG99",
  "setting_id": "GFSG99",
  "compatible_printers": [
    "Elegoo Neptune 0.4 nozzle",
    "Elegoo Neptune 0.6 nozzle",
    "Elegoo Neptune 0.8 nozzle",
    "Elegoo Neptune 2 0.4 nozzle",
    "Elegoo Neptune 2 0.6 nozzle",
    "Elegoo Neptune 2 0.8 nozzle",
    "Elegoo Neptune 2S 0.4 nozzle",
    "Elegoo Neptune 2S 0.6 nozzle",
    "Elegoo Neptune 2S 0.8 nozzle",
    "Elegoo Neptune 2D 0.4 nozzle",
    "Elegoo Neptune 2D 0.6 nozzle",
    "Elegoo Neptune 2D 0.8 nozzle",
    "Elegoo Neptune X 0.4 nozzle",
    "Elegoo Neptune X 0.6 nozzle",
    "Elegoo Neptune X 0.8 nozzle",
    "Elegoo Neptune 3 0.4 nozzle",
    "Elegoo Neptune 3 0.6 nozzle",
    "Elegoo Neptune 3 0.8 nozzle",
    "Elegoo Neptune 3 Pro 0.4 nozzle",
    "Elegoo Neptune 3 Pro 0.6 nozzle",
    "Elegoo Neptune 3 Pro 0.8 nozzle",
    "Elegoo Neptune 3 Pro 1.0 nozzle",
    "Elegoo Neptune 3 Plus 0.4 nozzle",
    "Elegoo Neptune 3 Plus 0.6 nozzle",
    "Elegoo Neptune 3 Plus 0.8 nozzle",
    "Elegoo Neptune 3 Plus 1.0 nozzle",
    "Elegoo Neptune 3 Max 0.4 nozzle",
    "Elegoo Neptune 3 Max 0.6 nozzle",
    "Elegoo Neptune 3 Max 0.8 nozzle",
    "Elegoo Neptune 3 Max 1.0 nozzle",
    "Elegoo Neptune 4 0.2 nozzle",
    "Elegoo Neptune 4 0.4 nozzle",
    "Elegoo Neptune 4 0.6 nozzle",
    "Elegoo Neptune 4 0.8 nozzle",
    "Elegoo Neptune 4 1.0 nozzle",
    "Elegoo Neptune 4 Max 0.2 nozzle",
    "Elegoo Neptune 4 Pro 0.4 nozzle",
    "Elegoo Neptune 4 Pro 0.6 nozzle",
    "Elegoo Neptune 4 Pro 0.8 nozzle",
    "Elegoo Neptune 4 Pro 1.0 nozzle",
    "Elegoo Neptune 4 Plus 0.2 nozzle",
    "Elegoo Neptune 4 Plus 0.4 nozzle",
    "Elegoo Neptune 4 Plus 0.6 nozzle",
    "Elegoo Neptune 4 Plus 0.8 nozzle",
    "Elegoo Neptune 4 Plus 1.0 nozzle",
    "Elegoo Neptune 4 Pro 0.2 nozzle",
    "Elegoo Neptune 4 Max 0.4 nozzle",
    "Elegoo Neptune 4 Max 0.6 nozzle",
    "Elegoo Neptune 4 Max 0.8 nozzle",
    "Elegoo Neptune 4 Max 1.0 nozzle"
  ],
  "name": "Generic PETG @Elegoo"
}

Version history

View full history with diffs →

v1 created 2026-05-19 12:36