Volumic PETG Ultra (Performance)

Generic · PETG · by elegoo-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_pet

→

Volumic PETG Ultra (Performance)

Compatible printers (14)

EXO42 IDRE (0.4 nozzle)
EXO42 IDRE COPY MODE (0.4 nozzle)
EXO42 IDRE MIRROR MODE (0.4 nozzle)
EXO42 Performance (0.4 nozzle)
EXO65 IDRE (0.4 nozzle)
EXO65 IDRE COPY MODE (0.4 nozzle)
EXO65 IDRE MIRROR MODE (0.4 nozzle)
EXO65 Performance (0.4 nozzle)
EXO65 Performance (0.6 nozzle)
EXO65 Performance (0.8 nozzle)
SH65 IDRE (0.4 nozzle)
SH65 IDRE COPY MODE (0.4 nozzle)
SH65 IDRE MIRROR MODE (0.4 nozzle)
SH65 Performance (0.4 nozzle)

Settings

Basic information

Material variant: PETG inherited
Vendor: Generic inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.27 inherited
Cost (/kg): 30 inherited

Print temperature

Nozzle (initial layer) (°C): 240 overridden
was 255 (inherited)
Nozzle (other layers) (°C): 240 overridden
was 255 (inherited)

Cooling

Fan minimum (%): 70 overridden
was 20 (inherited)
Fan maximum (%): 90 overridden
was 80 (inherited)
Disable fan for first N layers: 3 inherited
Full fan if layer below (sec): 5 inherited
Slow down if layer below (sec): 8 inherited
Min speed when slowed (mm/s): 10 inherited

Flow

Flow ratio: 1.00 overridden
was 1 (inherited)
Max volumetric speed (mm³/s): 50 overridden
was 25 (inherited)

Retraction

Retraction length (mm): nil inherited
Retraction speed (mm/s): nil inherited
Deretraction speed (mm/s): nil inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	60 inherited	60 inherited
Engineering Plate	70 inherited	0 inherited
High Temp Plate	70 inherited	60 overridden was 80
Textured PEI Plate	70 inherited	80 inherited

Other settings

bed type: Cool Plate inherited
compatible printers: EXO42 Performance (0.4 nozzle), EXO65 Performance (0.4 nozzle), EXO65 Performance (0.6 nozzle), EXO65 Performance (0.8 nozzle), SH65 Performance (0.4 nozzle), EXO42 IDRE (0.4 nozzle), EXO42 IDRE COPY MODE (0.4 nozzle), EXO42 IDRE MIRROR MODE (0.4 nozzle), EXO65 IDRE (0.4 nozzle), EXO65 IDRE COPY MODE (0.4 nozzle), EXO65 IDRE MIRROR MODE (0.4 nozzle), SH65 IDRE (0.4 nozzle), SH65 IDRE COPY MODE (0.4 nozzle), SH65 IDRE MIRROR MODE (0.4 nozzle) overridden
filament id: GFG99 overridden
filament minimal purge on wipe tower: 15 inherited
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: nil inherited
filament retraction minimum travel: nil inherited
filament soluble: 0 inherited
filament wipe: nil inherited
filament wipe distance: nil inherited
filament z hop: nil inherited
filament z hop types: nil inherited
full fan speed layer: 0 inherited
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 280 inherited
nozzle temperature range low: 220 inherited
overhang fan speed: 70 inherited
overhang fan threshold: 95% inherited
reduce fan stop start freq: 1 inherited
setting id: GFSG99 overridden
slow down for layer cooling: 1 inherited
temperature vitrification: 80 inherited

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "90"
  ],
  "fan_min_speed": [
    "70"
  ],
  "filament_cost": [
    "30"
  ],
  "filament_type": [
    "PETG"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "0"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "60"
  ],
  "cool_plate_temp": [
    "60"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.27"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "240"
  ],
  "overhang_fan_speed": [
    "70"
  ],
  "filament_flow_ratio": [
    "1.00"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "textured_plate_temp": [
    "80"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; filament start gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "fan_cooling_layer_time": [
    "5"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "95%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "80"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "eng_plate_temp_initial_layer": [
    "70"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "70"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "filament_max_volumetric_speed": [
    "50"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "240"
  ],
  "textured_plate_temp_initial_layer": [
    "70"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "nozzle_temperature_range_low": [
    "220"
  ],
  "nozzle_temperature_range_high": [
    "280"
  ],
  "setting_id": "GFSG99",
  "filament_id": "GFG99",
  "compatible_printers": [
    "EXO42 Performance (0.4 nozzle)",
    "EXO65 Performance (0.4 nozzle)",
    "EXO65 Performance (0.6 nozzle)",
    "EXO65 Performance (0.8 nozzle)",
    "SH65 Performance (0.4 nozzle)",
    "EXO42 IDRE (0.4 nozzle)",
    "EXO42 IDRE COPY MODE (0.4 nozzle)",
    "EXO42 IDRE MIRROR MODE (0.4 nozzle)",
    "EXO65 IDRE (0.4 nozzle)",
    "EXO65 IDRE COPY MODE (0.4 nozzle)",
    "EXO65 IDRE MIRROR MODE (0.4 nozzle)",
    "SH65 IDRE (0.4 nozzle)",
    "SH65 IDRE COPY MODE (0.4 nozzle)",
    "SH65 IDRE MIRROR MODE (0.4 nozzle)"
  ],
  "name": "Volumic PETG Ultra (Performance)"
}

Version history

View full history with diffs →

v1 created 2026-05-19 12:26