YUMI PLA Direct Drive

Yumi · OTHER · by elegoo-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_pla

→

Yumi Generic PLA

→

YUMI PLA Direct Drive

Compatible printers (6)

D12 230 PRO M2 DIRECT 0.4 nozzle
D12 230 PRO SMARTPAD DIRECT 0.4 nozzle
D12 300 PRO M2 DIRECT 0.4 nozzle
D12 300 PRO SMARTPAD DIRECT 0.4 nozzle
D12 500 PRO M2 DIRECT 0.4 nozzle
D12 500 PRO SMARTPAD DIRECT 0.4 nozzle

Settings

Basic information

Material variant: PLA inherited
Vendor: Yumi overridden
was Generic (inherited)
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.24 inherited
Cost (/kg): 30 inherited

Print temperature

Nozzle (initial layer) (°C): 220 inherited
Nozzle (other layers) (°C): 220 inherited

Cooling

Fan minimum (%): 100 inherited
Fan maximum (%): 100 inherited
Disable fan for first N layers: 1 inherited
Full fan if layer below (sec): 100 inherited
Slow down if layer below (sec): 8 overridden
was 8 (inherited)
Min speed when slowed (mm/s): 20 overridden
was 5 (inherited)

Flow

Flow ratio: 0.98 overridden
was 0.98 (inherited)
Max volumetric speed (mm³/s): 12 overridden
was 12 (inherited)

Retraction

Retraction length (mm): nil inherited
Retraction speed (mm/s): nil inherited
Deretraction speed (mm/s): nil inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	60 overridden was 50	60 overridden was 50
Engineering Plate	60 overridden was 50	60 overridden was 50
High Temp Plate	60 overridden was 50	60 overridden was 50
Textured PEI Plate	60 overridden was 50	60 overridden was 50

Other settings

additional cooling fan speed: 0 inherited
bed type: Cool Plate inherited
compatible printers: D12 230 PRO M2 DIRECT 0.4 nozzle, D12 230 PRO SMARTPAD DIRECT 0.4 nozzle, D12 300 PRO M2 DIRECT 0.4 nozzle, D12 300 PRO SMARTPAD DIRECT 0.4 nozzle, D12 500 PRO M2 DIRECT 0.4 nozzle, D12 500 PRO SMARTPAD DIRECT 0.4 nozzle overridden
was — (inherited)
enable pressure advance: 1 overridden
filament id: GFU99 overridden
was GFL99 (inherited)
filament minimal purge on wipe tower: 15 inherited
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: nil inherited
filament retraction minimum travel: nil inherited
filament soluble: 0 inherited
filament wipe: nil inherited
filament wipe distance: nil inherited
filament z hop: nil inherited
filament z hop types: nil inherited
full fan speed layer: 0 inherited
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 230 inherited
nozzle temperature range low: 190 inherited
overhang fan speed: 100 inherited
overhang fan threshold: 50% inherited
pressure advance: 0.02 overridden
reduce fan stop start freq: 1 inherited
setting id: GFSR99 overridden
was GFSA04 (inherited)
slow down for layer cooling: 1 inherited
temperature vitrification: 60 inherited

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "100"
  ],
  "fan_min_speed": [
    "100"
  ],
  "filament_cost": [
    "30"
  ],
  "filament_type": [
    "PLA"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "60"
  ],
  "filament_z_hop": [
    "nil"
  ],
  "hot_plate_temp": [
    "60"
  ],
  "cool_plate_temp": [
    "60"
  ],
  "filament_vendor": [
    "Yumi"
  ],
  "filament_density": [
    "1.24"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "220"
  ],
  "overhang_fan_speed": [
    "100"
  ],
  "filament_flow_ratio": [
    "0.98"
  ],
  "slow_down_min_speed": [
    "20"
  ],
  "textured_plate_temp": [
    "60"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; filament start gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "8"
  ],
  "fan_cooling_layer_time": [
    "100"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "50%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "60"
  ],
  "filament_retraction_length": [
    "nil"
  ],
  "reduce_fan_stop_start_freq": [
    "1"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "1"
  ],
  "eng_plate_temp_initial_layer": [
    "60"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "60"
  ],
  "cool_plate_temp_initial_layer": [
    "60"
  ],
  "filament_max_volumetric_speed": [
    "12"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "220"
  ],
  "textured_plate_temp_initial_layer": [
    "60"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "additional_cooling_fan_speed": [
    "0"
  ],
  "nozzle_temperature_range_low": [
    "190"
  ],
  "nozzle_temperature_range_high": [
    "230"
  ],
  "setting_id": "GFSR99",
  "filament_id": "GFU99",
  "compatible_printers": [
    "D12 230 PRO M2 DIRECT 0.4 nozzle",
    "D12 230 PRO SMARTPAD DIRECT 0.4 nozzle",
    "D12 300 PRO M2 DIRECT 0.4 nozzle",
    "D12 300 PRO SMARTPAD DIRECT 0.4 nozzle",
    "D12 500 PRO M2 DIRECT 0.4 nozzle",
    "D12 500 PRO SMARTPAD DIRECT 0.4 nozzle"
  ],
  "pressure_advance": [
    "0.02"
  ],
  "enable_pressure_advance": [
    "1"
  ],
  "name": "YUMI PLA Direct Drive"
}

Version history

View full history with diffs →

v1 created 2026-05-19 12:23