Snapmaker PA-CF

Generic · PA-CF · by elegoo-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

fdm_filament_common

→

fdm_filament_pa

→

Snapmaker PA-CF @base

→

Snapmaker PA-CF

Compatible printers (24)

Snapmaker A250 (0.4 nozzle)
Snapmaker A250 (0.6 nozzle)
Snapmaker A250 (0.8 nozzle)
Snapmaker A250 BKit (0.4 nozzle)
Snapmaker A250 BKit (0.6 nozzle)
Snapmaker A250 BKit (0.8 nozzle)
Snapmaker A250 QS+B Kit (0.4 nozzle)
Snapmaker A250 QS+B Kit (0.6 nozzle)
Snapmaker A250 QS+B Kit (0.8 nozzle)
Snapmaker A250 QSKit (0.4 nozzle)
Snapmaker A250 QSKit (0.6 nozzle)
Snapmaker A250 QSKit (0.8 nozzle)
Snapmaker A350 (0.4 nozzle)
Snapmaker A350 (0.6 nozzle)
Snapmaker A350 (0.8 nozzle)
Snapmaker A350 BKit (0.4 nozzle)
Snapmaker A350 BKit (0.6 nozzle)
Snapmaker A350 BKit (0.8 nozzle)
Snapmaker A350 QS+B Kit (0.4 nozzle)
Snapmaker A350 QS+B Kit (0.6 nozzle)
Snapmaker A350 QS+B Kit (0.8 nozzle)
Snapmaker A350 QSKit (0.4 nozzle)
Snapmaker A350 QSKit (0.6 nozzle)
Snapmaker A350 QSKit (0.8 nozzle)

Settings

Basic information

Material variant: PA inherited
Vendor: Generic inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 1.04 inherited
Cost (/kg): 20 inherited

Print temperature

Nozzle (initial layer) (°C): 270 inherited
Nozzle (other layers) (°C): 270 inherited

Cooling

Fan minimum (%): 0 inherited
Fan maximum (%): 60 inherited
Disable fan for first N layers: 3 inherited
Full fan if layer below (sec): 10 inherited
Slow down if layer below (sec): 2 inherited
Min speed when slowed (mm/s): 10 inherited

Flow

Flow ratio: 1 inherited
Max volumetric speed (mm³/s): 8 inherited

Retraction

Retraction length (mm): 1.0 inherited
Retraction speed (mm/s): nil inherited
Deretraction speed (mm/s): nil inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
Cool Plate	0 inherited	0 inherited
Engineering Plate	100 inherited	100 inherited
High Temp Plate	100 inherited	100 inherited
Textured PEI Plate	100 inherited	100 inherited

Other settings

bed type: Cool Plate inherited
compatible printers: Snapmaker A250 (0.4 nozzle), Snapmaker A250 (0.6 nozzle), Snapmaker A250 (0.8 nozzle), Snapmaker A250 BKit (0.4 nozzle), Snapmaker A250 BKit (0.6 nozzle), Snapmaker A250 BKit (0.8 nozzle), Snapmaker A250 QS+B Kit (0.4 nozzle), Snapmaker A250 QS+B Kit (0.6 nozzle), Snapmaker A250 QS+B Kit (0.8 nozzle), Snapmaker A250 QSKit (0.4 nozzle), Snapmaker A250 QSKit (0.6 nozzle), Snapmaker A250 QSKit (0.8 nozzle), Snapmaker A350 (0.4 nozzle), Snapmaker A350 (0.6 nozzle), Snapmaker A350 (0.8 nozzle), Snapmaker A350 BKit (0.4 nozzle), Snapmaker A350 BKit (0.6 nozzle), Snapmaker A350 BKit (0.8 nozzle), Snapmaker A350 QS+B Kit (0.4 nozzle), Snapmaker A350 QS+B Kit (0.6 nozzle), Snapmaker A350 QS+B Kit (0.8 nozzle), Snapmaker A350 QSKit (0.4 nozzle), Snapmaker A350 QSKit (0.6 nozzle), Snapmaker A350 QSKit (0.8 nozzle) overridden
filament id: 581236806 inherited
filament minimal purge on wipe tower: 15 inherited
filament retract before wipe: nil inherited
filament retract restart extra: nil inherited
filament retract when changing layer: nil inherited
filament retraction minimum travel: nil inherited
filament soluble: 0 inherited
filament wipe: nil inherited
filament wipe distance: nil inherited
filament z hop: 0.0 inherited
filament z hop types: nil inherited
full fan speed layer: 0 inherited
instantiation: true overridden
was false (inherited)
nozzle temperature range high: 300 inherited
nozzle temperature range low: 260 inherited
overhang fan speed: 60 inherited
overhang fan threshold: 95% inherited
reduce fan stop start freq: 0 inherited
setting id: 144230794 overridden
slow down for layer cooling: 1 inherited
temperature vitrification: 108 inherited

Raw resolved JSON

{
  "type": "filament",
  "bed_type": [
    "Cool Plate"
  ],
  "fan_max_speed": [
    "60"
  ],
  "fan_min_speed": [
    "0"
  ],
  "filament_cost": [
    "20"
  ],
  "filament_type": [
    "PA"
  ],
  "filament_wipe": [
    "nil"
  ],
  "instantiation": "true",
  "eng_plate_temp": [
    "100"
  ],
  "filament_z_hop": [
    "0.0"
  ],
  "hot_plate_temp": [
    "100"
  ],
  "cool_plate_temp": [
    "0"
  ],
  "filament_vendor": [
    "Generic"
  ],
  "filament_density": [
    "1.04"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "filament_end_gcode": [
    "; filament end gcode \n"
  ],
  "nozzle_temperature": [
    "270"
  ],
  "overhang_fan_speed": [
    "60"
  ],
  "filament_flow_ratio": [
    "1"
  ],
  "slow_down_min_speed": [
    "10"
  ],
  "textured_plate_temp": [
    "100"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_start_gcode": [
    "; Filament gcode\n"
  ],
  "filament_z_hop_types": [
    "nil"
  ],
  "full_fan_speed_layer": [
    "0"
  ],
  "slow_down_layer_time": [
    "2"
  ],
  "fan_cooling_layer_time": [
    "10"
  ],
  "filament_wipe_distance": [
    "nil"
  ],
  "overhang_fan_threshold": [
    "95%"
  ],
  "filament_retraction_speed": [
    "nil"
  ],
  "temperature_vitrification": [
    "108"
  ],
  "filament_retraction_length": [
    "1.0"
  ],
  "reduce_fan_stop_start_freq": [
    "0"
  ],
  "filament_deretraction_speed": [
    "nil"
  ],
  "slow_down_for_layer_cooling": [
    "1"
  ],
  "close_fan_the_first_x_layers": [
    "3"
  ],
  "eng_plate_temp_initial_layer": [
    "100"
  ],
  "filament_retract_before_wipe": [
    "nil"
  ],
  "hot_plate_temp_initial_layer": [
    "100"
  ],
  "cool_plate_temp_initial_layer": [
    "0"
  ],
  "filament_max_volumetric_speed": [
    "8"
  ],
  "filament_retract_restart_extra": [
    "nil"
  ],
  "nozzle_temperature_initial_layer": [
    "270"
  ],
  "textured_plate_temp_initial_layer": [
    "100"
  ],
  "filament_retraction_minimum_travel": [
    "nil"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "15"
  ],
  "filament_retract_when_changing_layer": [
    "nil"
  ],
  "nozzle_temperature_range_low": [
    "260"
  ],
  "nozzle_temperature_range_high": [
    "300"
  ],
  "filament_id": "581236806",
  "setting_id": "144230794",
  "compatible_printers": [
    "Snapmaker A250 (0.4 nozzle)",
    "Snapmaker A250 (0.6 nozzle)",
    "Snapmaker A250 (0.8 nozzle)",
    "Snapmaker A250 BKit (0.4 nozzle)",
    "Snapmaker A250 BKit (0.6 nozzle)",
    "Snapmaker A250 BKit (0.8 nozzle)",
    "Snapmaker A250 QS+B Kit (0.4 nozzle)",
    "Snapmaker A250 QS+B Kit (0.6 nozzle)",
    "Snapmaker A250 QS+B Kit (0.8 nozzle)",
    "Snapmaker A250 QSKit (0.4 nozzle)",
    "Snapmaker A250 QSKit (0.6 nozzle)",
    "Snapmaker A250 QSKit (0.8 nozzle)",
    "Snapmaker A350 (0.4 nozzle)",
    "Snapmaker A350 (0.6 nozzle)",
    "Snapmaker A350 (0.8 nozzle)",
    "Snapmaker A350 BKit (0.4 nozzle)",
    "Snapmaker A350 BKit (0.6 nozzle)",
    "Snapmaker A350 BKit (0.8 nozzle)",
    "Snapmaker A350 QS+B Kit (0.4 nozzle)",
    "Snapmaker A350 QS+B Kit (0.6 nozzle)",
    "Snapmaker A350 QS+B Kit (0.8 nozzle)",
    "Snapmaker A350 QSKit (0.4 nozzle)",
    "Snapmaker A350 QSKit (0.6 nozzle)",
    "Snapmaker A350 QSKit (0.8 nozzle)"
  ],
  "name": "Snapmaker PA-CF"
}

Version history

View full history with diffs →

v1 created 2026-05-19 12:22