Snapmaker PLA Matte @U1 base
Unknown · PLA
· by elegoo-system
· 0 downloads
Settings
Basic information
- Material variant
-
PLA overridden
- Density (g/cm³)
-
1.24 overridden
- Cost (/kg)
-
20 overridden
Print temperature
- Nozzle (initial layer) (°C)
-
220 overridden
- Nozzle (other layers) (°C)
-
220 overridden
Cooling
- Fan minimum (%)
-
100 overridden
- Fan maximum (%)
-
100 overridden
- Disable fan for first N layers
-
1 overridden
- Full fan if layer below (sec)
-
100 overridden
- Slow down if layer below (sec)
-
4 overridden
- Min speed when slowed (mm/s)
-
10 overridden
Flow
- Max volumetric speed (mm³/s)
-
12 overridden
Retraction
- Retraction length (mm)
-
nil overridden
Bed temperature
| Plate | Initial layer (°C) | Other layers (°C) |
|---|---|---|
| Cool Plate |
60
overridden
|
60
overridden
|
| Engineering Plate |
60
overridden
|
60
overridden
|
| High Temp Plate |
60
overridden
|
60
overridden
|
| Textured PEI Plate |
60
overridden
|
60
overridden
|
Other settings
- additional cooling fan speed
-
70 overridden
- filament cooling final speed
-
60 overridden
- filament cooling initial speed
-
35 overridden
- filament cooling moves
-
2 overridden
- filament id
-
141703112701 overridden
- filament load time
-
2 overridden
- filament loading speed
-
35 overridden
- filament loading speed start
-
35 overridden
- filament unload time
-
2 overridden
- filament unloading speed
-
35 overridden
- filament unloading speed start
-
35 overridden
- instantiation
-
false overridden
- nozzle temperature range high
-
230 overridden
- nozzle temperature range low
-
190 overridden
- overhang fan speed
-
100 overridden
- overhang fan threshold
-
50% overridden
- reduce fan stop start freq
-
1 overridden
- slow down for layer cooling
-
1 overridden
- temperature vitrification
-
60 overridden
Raw resolved JSON
{
"type": "filament",
"filament_id": "141703112701",
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"100"
],
"filament_cost": [
"20"
],
"filament_type": [
"PLA"
],
"instantiation": "false",
"eng_plate_temp": [
"60"
],
"hot_plate_temp": [
"60"
],
"cool_plate_temp": [
"60"
],
"filament_density": [
"1.24"
],
"filament_end_gcode": [
""
],
"filament_load_time": [
"2"
],
"nozzle_temperature": [
"220"
],
"overhang_fan_speed": [
"100"
],
"slow_down_min_speed": [
"10"
],
"textured_plate_temp": [
"60"
],
"filament_start_gcode": [
"; filament start gcode\n"
],
"filament_unload_time": [
"2"
],
"slow_down_layer_time": [
"4"
],
"fan_cooling_layer_time": [
"100"
],
"filament_cooling_moves": [
"2"
],
"filament_loading_speed": [
"35"
],
"overhang_fan_threshold": [
"50%"
],
"filament_unloading_speed": [
"35"
],
"temperature_vitrification": [
"60"
],
"filament_retraction_length": [
"nil"
],
"reduce_fan_stop_start_freq": [
"1"
],
"slow_down_for_layer_cooling": [
"1"
],
"additional_cooling_fan_speed": [
"70"
],
"close_fan_the_first_x_layers": [
"1"
],
"eng_plate_temp_initial_layer": [
"60"
],
"filament_cooling_final_speed": [
"60"
],
"filament_loading_speed_start": [
"35"
],
"hot_plate_temp_initial_layer": [
"60"
],
"nozzle_temperature_range_low": [
"190"
],
"cool_plate_temp_initial_layer": [
"60"
],
"filament_max_volumetric_speed": [
"12"
],
"nozzle_temperature_range_high": [
"230"
],
"filament_cooling_initial_speed": [
"35"
],
"filament_unloading_speed_start": [
"35"
],
"nozzle_temperature_initial_layer": [
"220"
],
"textured_plate_temp_initial_layer": [
"60"
],
"name": "Snapmaker PLA Matte @U1 base",
"filament_settings_id": [
"Snapmaker PLA Matte @U1 base"
]
}
Version history
View full history with diffs →- v1 created 2026-05-19 12:22