Ultrafuse Metal @COREONE 0.6

Forward AM · METAL · by prusa-system · 0 downloads

Download for Bambu Studio Download for OrcaSlicer Download for PrusaSlicer

Compare

Inheritance

→

→

→

→

Ultrafuse Metal @PG 0.6

→

Ultrafuse Metal @COREONE 0.6

Includes (6)

Bambu-only mechanism: these template profiles contribute settings on top of the inheritance chain, before this profile's own overrides. Values pulled in via an include are tagged via <template> in the panels below.

Settings

Basic information

Material variant: METAL inherited
Vendor: Forward AM inherited
Diameter (mm): 1.75 inherited
Density (g/cm³): 4.5 inherited

Print temperature

Nozzle (initial layer) (°C): 250 inherited
Nozzle (other layers) (°C): 250 inherited
Chamber (°C): 55 via *ABS06PGC1*

Cooling

Fan minimum (%): 0 overridden
was 0 (inherited)
Fan maximum (%): 0 overridden
was 0 (inherited)
Disable fan for first N layers: 4 inherited
Full fan if layer below (sec): 30 via *ABS06PGC1*
Slow down if layer below (sec): 20 inherited
Min speed when slowed (mm/s): 15 inherited

Flow

Flow ratio: 1.08 inherited
Max volumetric speed (mm³/s): 4 inherited

Bed temperature

Plate	Initial layer (°C)	Other layers (°C)
High Temp Plate	100 inherited	100 inherited

Other settings

bridge fan speed: 0 overridden
was 0 (inherited)
chamber minimal temperature: 40 via *ABS06PGC1*
compatible printers condition: printer_model=~/(COREONE|COREONEOAK|COREONEL)/ and nozzle_diameter[0]==0.6 and ! single_extruder_multi_material via *PG_NOHF06C1*
cooling: 0 inherited
cooling perimeter transition distance: 10 via *ABS06PG*
cooling slowdown logic: consistent_surface via *ABS06PG*
end filament gcode: ; Filament-specific end gcode inherited
fan always on: 0 inherited
filament abrasive: 1 inherited
filament colour: #FFFFFF inherited
filament cooling final speed: 2.5 via *ABS06PG*
filament cooling initial speed: 5 via *ABS06PG*
filament cooling moves: 3 via *ABS06PG*
filament infill max crossing speed: 0 via *ABS06PG*
filament infill max speed: 0 via *ABS06PG*
filament load time: 10.9 via *ABS06PGC1*
filament loading speed: 10 via *ABS06PG*
filament loading speed start: 50 via *ABS06PG*
filament minimal purge on wipe tower: 35 via *ABS06PG*
filament ramming parameters: 250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387 via *ABS06PG*
filament shrinkage compensation xy: 0% overridden
filament shrinkage compensation z: 0% overridden
filament soluble: 0 inherited
filament stamping distance: 45 via *ABS06PG*
filament stamping loading speed: 26.5 via *ABS06PG*
filament toolchange delay: 0 via *ABS06PG*
filament unload time: 8.9 via *ABS06PGC1*
filament unloading speed: 60 via *ABS06PG*
filament unloading speed start: 60 via *ABS06PG*
idle temperature: 130 via *ABS06PGC1*
renamed from: Ultrafuse 17-4 PH inherited
start filament gcode: M572 S0 overridden
was M900 K0 (inherited)

Raw resolved JSON

{
  "cooling": [
    "0"
  ],
  "filament_cost": [
    ""
  ],
  "filament_notes": [
    ""
  ],
  "filament_colour": [
    "#FFFFFF"
  ],
  "filament_vendor": [
    "Forward AM"
  ],
  "filament_density": [
    "4.5"
  ],
  "filament_soluble": [
    "0"
  ],
  "filament_diameter": [
    "1.75"
  ],
  "end_filament_gcode": [
    "; Filament-specific end gcode"
  ],
  "filament_load_time": [
    "10.9"
  ],
  "compatible_printers": [
    ""
  ],
  "filament_flow_ratio": [
    "1.08"
  ],
  "slow_down_min_speed": [
    "15"
  ],
  "filament_settings_id": [
    ""
  ],
  "filament_unload_time": [
    "8.9"
  ],
  "slow_down_layer_time": [
    "20"
  ],
  "start_filament_gcode": [
    "M572 S0"
  ],
  "filament_cooling_moves": [
    "3"
  ],
  "filament_loading_speed": [
    "10"
  ],
  "filament_unloading_speed": [
    "60"
  ],
  "filament_toolchange_delay": [
    "0"
  ],
  "filament_ramming_parameters": [
    "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
  ],
  "filament_cooling_final_speed": [
    "2.5"
  ],
  "filament_loading_speed_start": [
    "50"
  ],
  "compatible_printers_condition": [
    "printer_model=~/(COREONE|COREONEOAK|COREONEL)/ and nozzle_diameter[0]==0.6 and ! single_extruder_multi_material"
  ],
  "filament_max_volumetric_speed": [
    "4"
  ],
  "filament_cooling_initial_speed": [
    "5"
  ],
  "filament_unloading_speed_start": [
    "60"
  ],
  "filament_minimal_purge_on_wipe_tower": [
    "35"
  ],
  "fan_always_on": [
    "0"
  ],
  "fan_max_speed": [
    "0"
  ],
  "fan_min_speed": [
    "0"
  ],
  "filament_type": [
    "METAL"
  ],
  "hot_plate_temp": [
    "100"
  ],
  "bridge_fan_speed": [
    "0"
  ],
  "nozzle_temperature": [
    "250"
  ],
  "fan_cooling_layer_time": [
    "30"
  ],
  "close_fan_the_first_x_layers": [
    "4"
  ],
  "hot_plate_temp_initial_layer": [
    "100"
  ],
  "nozzle_temperature_initial_layer": [
    "250"
  ],
  "renamed_from": [
    "Ultrafuse 17-4 PH"
  ],
  "filament_abrasive": [
    "1"
  ],
  "idle_temperature": [
    "130"
  ],
  "cooling_slowdown_logic": [
    "consistent_surface"
  ],
  "filament_infill_max_speed": [
    "0"
  ],
  "filament_stamping_distance": [
    "45"
  ],
  "filament_stamping_loading_speed": [
    "26.5"
  ],
  "filament_infill_max_crossing_speed": [
    "0"
  ],
  "cooling_perimeter_transition_distance": [
    "10"
  ],
  "chamber_temperature": [
    "55"
  ],
  "chamber_minimal_temperature": [
    "40"
  ],
  "filament_shrinkage_compensation_z": [
    "0%"
  ],
  "filament_shrinkage_compensation_xy": [
    "0%"
  ],
  "name": "Ultrafuse Metal @COREONE 0.6",
  "type": "filament"
}

Version history

View full history with diffs →

v1 created 2026-05-19 11:47